Cement-based rapid-setting adhesive for interior and exterior floor and wall installations of ceramic and porcelain tiles and non-moisture sensitive natural stone
Cement-based rapid-setting adhesive for interior and exterior floor and wall…
MAPELASTIC AQUADEFENSE is a ready to use rapid-drying liquid membrane for waterproofing damp areas such as bathrooms, showers, laundries, saunas, balconies and terraces before installing dressing…
MAPELASTIC AQUADEFENSE is a ready to use rapid-drying liquid membrane for…
A ready to use kit for the rapid waterproofing of bathrooms, wet rooms and showers to receive tiles after 4 hours. The tanking kit
comprises of Mapelastic AquaDefense and Mapeband PE 120, which is…
A ready to use kit for the rapid waterproofing of bathrooms, wet rooms and…
Two-component flexible cementitious mortar for waterproofing concrete and masonry surfaces subject to negative and positive hydraulic pressure. Where to use: Waterproofing concrete and masonry…
Two-component flexible cementitious mortar for waterproofing concrete and…
MAPELASTIC ZERO is a two-component elastic cementitious mortar for permanent , durable, simply and quickly waterproofing of balconies and terraces, created thanks to more than 30 years of experience…
MAPELASTIC ZERO is a two-component elastic cementitious mortar for permanent ,…
Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems.
Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…
Where to use: Grouting all types of external paved floors (porcelain slabs, cement-based composites, porphyry slabs and blocks, etc.) subject to light traffic (vehicles up to 3.5 tonnes). Some…
Where to use: Grouting all types of external paved floors (porcelain slabs,…
Preparation of the product : Mix a 25 kg bag of MapePave Mortar with 1.55-1.8 litres of water for at least 5 minutes in a cement mixer, automatic pressure pump or truck mixer until a homogeneous mix…
Preparation of the product : Mix a 25 kg bag of MapePave Mortar with 1.55-1.8…
Preparation of the product: Mix a 20 kg bag of MapePave Slurry with 6.4 litres of water for at least 5 minutes with a Mechanical mixer and paddle. The mix must be applied to the MapePave Mortar fresh…
Preparation of the product: Mix a 20 kg bag of MapePave Slurry with 6.4 litres…