Project Sahligut Learning Swimming Pool, Biel

Sahligut Learning Swimming Pool

Biel, Switzerland

Ref #: 4633

Category: SPORT FACILITIES

Construction


Yard	The Sahligut learning swimming hall was completely renovated. The overall renovation included a new chrome steel swimming pool and a new glass façade, the complete replacement of the pool water technology and the redesign of the cloakroom area.
Location	Biel, Switzerland
Subcategory	Aquatic Centre
Application	The teaching pool at the Sahligut school was built between 1967 and 1968. After 50 years of operation, a comprehensive renovation was urgently needed.
Start and finish date	2021/2022
Application Type	Floor/wall coverings
Architects	Leimer Tschanz Architekten AG, Viaduktstr. 33, 2501 Biel Natalie Wyss Architektin
Specialists involved	Stadt Biel/Bienne Tobias Grimm Architekt und Projektleiter
MAPEI Coordination	Pirmin Nünlist

Product used for the project

MAPEBAND FLEX ROLL

TECHNICAL DATA: Material: TPE. Tensile strength (N/mm²): > 6 MPa. Elongation at failure: > 400%. Tear strength: > 600 N/cm. Shore A hardness: approx. 80. Width: 300 mm (other sizes available upon…

TECHNICAL DATA: Material: TPE. Tensile strength (N/mm²): > 6 MPa. Elongation at…

MAPECOAT I 24

Two-component epoxy paint for anti-acid coatings on concrete surfaces.

MAPEFOAM

Round closed cell expanded polyethylene foam cord for the correct sizing of the movement joints. Applications: Placing at the base of the movement joints (expansion, separation, control, etc.).…

Round closed cell expanded polyethylene foam cord for the correct sizing of the…

MAPEGUARD WP 200

TECHNICAL DATA: Material: product made up of three layers of polypropylene/polyethylene. Colour: blue. Thickness of membrane (mm):> 200 µm. Size: 30 m x 1 metre and 5 m x 1 metre rolls.

TECHNICAL DATA: Material: product made up of three layers of…

MAPELASTIC TURBO

Two-component rapid-drying elastic cementitious mortar for waterproofing terraces and balconies, including at low temperatures and on substrates not completely dry.

Two-component rapid-drying elastic cementitious mortar for waterproofing…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems.

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

MAPETEX 50

Non-woven polypropylene fabric (weight 50 g/m²) for reinforcing waterproof membranes.

Non-woven polypropylene fabric (weight 50 g/m²) for reinforcing waterproof…

PLANITOP FAST 330

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities.

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water according to the absorption of the substrate. Drying time: 2 hours according to the dilution rate and the…

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to…