Project Thermal bath of Zalakaros,

Thermal bath of Zalakaros

Hungary

Ref #: 222020

Category: TOURISM AND WELLNESS


Yard	Waterproofing and installing cermic tiles and mosaic in the spa.
Location	Hungary
Subcategory	BATH
Application	System of waterproofing and installing ceramic tiles, mosaic.
Start and finish date	2018
Application Type	Floor/wall coverings, Waterproofing systems
Client	The council of Zalakaros
Contractor company	Szabadics Közmű és Mélyépítő Zrt.
Installer companies	Sándor Horváth
Architects	Archin Deko
MAPEI Distributor	Alu-Csat Bt.
Credits	Péter Szabó
MAPEI Coordination	Gergely Garay, Zsolt Marton

Product used for the project

KERAPOXY CQ

Two-component epoxy grout, easy to apply and excellent cleanability, with a bacteriostatic agent and BioBlock® technology, ideal for grouting ceramic tiles and mosaics. For joints of at least 1 mm.…

Two-component epoxy grout, easy to apply and excellent cleanability, with a…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems.

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

NIVOPLAN

TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings. Workability time: 2-3 hours. Thickness applied: from 2 to 20 mm. Waiting time before laying ceramic and natural stone:…

TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings.…

Synthetic rubber latex admixture to improve mechanical strength of cementitious mixes for screeds and renders. Also for producing bonding slurries for Mapei Screeds and splatterdash coats for renders…

Synthetic rubber latex admixture to improve mechanical strength of cementitious…

PLANITOP FAST 330

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities.

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…

PRIMER G

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water according to the absorption of the substrate. Drying time: 2 hours according to the dilution rate and the…

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to…

TOPCEM PRONTO

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds.

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal…

ULTRACOLOR PLUS

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…

ULTRALITE S2

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 30 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24 hours. Set to light foot traffic: approx. 24 hours.…

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 30 minutes.…