Project Waste to energy plant, San Vittore del Lazio

Waste to energy plant

San Vittore del Lazio, Italy

Ref #: 4889

Category: PRODUCTION AND SERVICES


Yard	waterproofing
Location	San Vittore del Lazio, Italy
Subcategory	WATER-SOFTENER
Built in	2011
Opened in	2011
Application	Interior waterproofing
Application Type	Waterproofing systems
Client	E.A.L.L. srl; Gruppo ACEA Spa
Contractor company	L'internazionale Soc. Coop.
Installer companies	TE Srl
Credits	arch. Mario Monardo
Project Manager	ing. Francesco Martino

Product used for the project

IDROSTOP MASTIC

Single-component adhesive for the installation of Idrostop. Idrostop Mastic is a ready to use solvent-free single-component adhesive with a base of MS polymers. On extrusion, it is a thixotropic…

Single-component adhesive for the installation of Idrostop. Idrostop Mastic is…

LAMPOCEM

Ready-to-use, quick-setting and hardening, anti-shrinkage hydraulic binder.

LAMPOSILEX

Where to use: For instant stopping of water leaks, even water under pressure. Some application examples: Stopping water leaks in basements, subways and below grade structures in general. Stopping…

Where to use: For instant stopping of water leaks, even water under pressure.…

MAPEFER 1K ZERO

One-component, anti-corrosion cementitious mortar for steel reinforcement rods

MAPEGROUT SV

TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT SV with 12-13 parts of water. Pot life of mix: 15 minutes (at +20°C). Minimum applicable thickness: 1 cm.…

TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts…

MAPELASTIC FOUNDATION

Two-component flexible cementitious mortar for waterproofing concrete and masonry surfaces subject to negative and positive hydraulic pressure. Where to use: Waterproofing concrete and masonry…

Two-component flexible cementitious mortar for waterproofing concrete and…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems.

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPEPROOF MASTIC

Bentonite paste made from natural sodium bentonite and plasticising additives for sealing elements which pass through surfaces. Where to use: Mapeproof Mastic is a bentonite paste specifically…

Bentonite paste made from natural sodium bentonite and plasticising additives…

PLANITOP FAST 330

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities.

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…