Products for structural strengthening

Mapei has specific solutions and a dedicated technical team available for structural strengthening work.
Mapei’s Structural Strengthening Division offers support to help design engineers find solutions for static strengthening and anti-seismic improvements and upgrades for structures.

Products for structural strengthening

Select a product category

Preparation of concrete and brick supports

Strengthening concrete and steel structures

Strengthening masonry structures

Strengthening wooden structures

CONSOLIDANTE 8020

Reversible consolidating product in solvent for the conservative restoration and consolidation of porous stone substrates, lime render and layers of…

Reversible consolidating product in solvent for the conservative restoration…

ELASTOCOLOR PITTURA PLUS

Elastomeric hygienic paint with crack-bridging ability LONG LASTING ELASTICITY MOULD AND ALGAE RESISTANT

Elastomeric hygienic paint with crack-bridging ability LONG LASTING ELASTICITY…

ELASTOCOLOR PRIMER

Solvent-based high-penetration consolidating primer to even out surfaces. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN…

Solvent-based high-penetration consolidating primer to even out surfaces.…

EPOJET

Two-component, super-fluid epoxy resin for injections and anchorings. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: 40…

Two-component, super-fluid epoxy resin for injections and anchorings. TECHNICAL…

EPOJET LV

Two-component epoxy resin with a very low viscosity for injecting into micro-cracks, also on wet surfaces. TECHNICAL DATA: Mixing ratio: comp. A :…

Two-component epoxy resin with a very low viscosity for injecting into…

EPORIP

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked screeds. TECHNICAL DATA: Consistency: comp. A: fluid paste; comp. B: fluid…

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked…

Elastocolor Paint

Elastomeric, crack-bridging, permanently flexible, protective paint with high resistance to chemicals for internal and external surfaces. TECHNICAL…

Elastomeric, crack-bridging, permanently flexible, protective paint with high…

MAPEFER

Two-component, anti-corrosion cementitious mortar for steel reinforcement rods. TECHNICAL DATA: Maximum dimension of aggregate: 0.5 mm. Mixing ratio:…

Two-component, anti-corrosion cementitious mortar for steel reinforcement rods.…

MAPEFER 1K

One-component, anti-corrosion cementitious mortar for steel reinforcement rods. TECHNICAL DATA: Maximum dimension of aggregate: 0.5 mm. Mixing ratio:…

One-component, anti-corrosion cementitious mortar for steel reinforcement rods.…

MAPEFER 1K ZERO

One-component, anti-corrosion cementitious mortar for steel reinforcement rods

MAPEFIBRE IT 39 NV

Structural polypropylene fibres for making high ductility concrete and shotcrete

MAPEFINISH

Two-component cementitious mortar for finishing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 4 parts of MAPEFINISH…

Two-component cementitious mortar for finishing concrete. TECHNICAL DATA:…

MAPEGROUT 430

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 1 mm.…

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing…

MAPEGROUT 430 ZERO

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing concrete. May also be applied with continuous-feed rendering machine

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing…

MAPEGROUT BM

Two-component cementitious mortar with a low modulus of elasticity for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm.…

Two-component cementitious mortar with a low modulus of elasticity for…

MAPEGROUT EASY FLOW GF

One component, shrinkage-compensated, sulphate-resistant, thixotropic, inorganic fibre-reinforced mortar, for repairing concrete structures where…

One component, shrinkage-compensated, sulphate-resistant, thixotropic,…

MAPEGROUT EASY FLOW ZERO

One-component, fibre-reinforced, shrinkage-compensated, sulphate-resistant thixotropic mortar, with high crack resistance, even when subject to…

One-component, fibre-reinforced, shrinkage-compensated, sulphate-resistant…

MAPEGROUT HI-FLOW ZERO

Shrinkage-compensated, fibre-reinforced mortar for concrete repair

MAPEGROUT SV FIBER

Hi-flow, steel fibre-reinforced compensated-shrinkage, quick-setting and hardening, high-ductility cementitious mortar applied at temperatures down…

Hi-flow, steel fibre-reinforced compensated-shrinkage, quick-setting and…

MAPEGROUT T40

Medium-strength (40 MPa), compensated-shrinkage fibre-reinforced thixotropic mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of…

Medium-strength (40 MPa), compensated-shrinkage fibre-reinforced thixotropic…

MAPEGROUT T60

Fibre-reinforced, sulphate-resistant thixotropic mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio:…

Fibre-reinforced, sulphate-resistant thixotropic mortar for repairing concrete.…

MAPEGROUT THIXOTROPIC ZERO

Shrinkage-compensated fibre-reinforced mortar for concrete repair

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPELASTIC SMART

Two-component, high-flexibility cementitious mortar (with crack-bridging > 2 mm), applied by trowel or with a roller, for waterproofing balconies,…

Two-component, high-flexibility cementitious mortar (with crack-bridging > 2…

MAPESHIELD E 25

Adhesive zinc plates applied directly on the surface of structures for galvanic cathodic protection against the corrosion of steel reinforcement…

Adhesive zinc plates applied directly on the surface of structures for galvanic…

MAPESHIELD I

Pure zinc anodes coated with a special conductive paste, for galvanic cathodic protection against corrosion of steel reinforcement in new structures…

Pure zinc anodes coated with a special conductive paste, for galvanic cathodic…

MAPESHIELD S

Zinc plate with adhesive backing for galvanic cathodic protection against the corrosion of steel structures exposed to atmospheric conditions.…

Zinc plate with adhesive backing for galvanic cathodic protection against the…

MONOFINISH

One-component, normal-setting cementitious mortar for smoothing concrete and cementitious render. TECHNICAL DATA: Maximum dimension of aggregate: 0.4…

One-component, normal-setting cementitious mortar for smoothing concrete and…

Mapegrout Hi-Flow

Fibre-reinforced, controlled-shrinkage mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts…

Fibre-reinforced, controlled-shrinkage mortar for repairing concrete. TECHNICAL…

Mapegrout Rapid

Fibre-reinforced, quick setting and hardening, compensated-shrinkage mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 1…

Fibre-reinforced, quick setting and hardening, compensated-shrinkage mortar for…

Mapegrout Thixotropic

Fibre-reinforced, compensated-shrinkage mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100…

Fibre-reinforced, compensated-shrinkage mortar for repairing concrete.…

PLANITOP 200

Water-repellent cementitious skimming mortar with a fine-textured, natural finish for concrete and plastic, glass and porcelain coverings. TECHNICAL…

Water-repellent cementitious skimming mortar with a fine-textured, natural…

PLANITOP 207

Water-repellent cementitious skimming mortar with a medium-textured, natural finish for concrete and plastic, glass and porcelain coverings.…

Water-repellent cementitious skimming mortar with a medium-textured, natural…

PLANITOP 430

Fine-grained thixotropic, fibre-reinforced, controlled-shrinkage, medium-strength (30 N/mm2) mortar for repairing concrete Where to use To repair the…

Fine-grained thixotropic, fibre-reinforced, controlled-shrinkage,…

PLANITOP HDM MAXI

Two-component ready-mixed, high ductility pozzolan-reaction, fibre-reinforced mortar for structural “reinforced” strengthening work, when used in…

Two-component ready-mixed, high ductility pozzolan-reaction, fibre-reinforced…

PLANITOP HDM RESTAURO

Two-component, pre-blended, high-ductility, fibre-reinforced, hydraulic lime (NHL) and ECO-POZZOLAN-based light-coloured mortar, particularly…

Two-component, pre-blended, high-ductility, fibre-reinforced, hydraulic lime…

PRIMER 3296

Acrylic primer in water dispersion with high penetration, consolidating and anti-dust properties for screeds. TECHNICAL DATA: Consistency: liquid.…

Acrylic primer in water dispersion with high penetration, consolidating and…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour:…

Synthetic resin primer in water dispersion with a very low content of volatile…

STABILCEM

Expansive, super-fluid cementitious binder for mixing injection slurry, mortar and concrete. TECHNICAL DATA: Mixing ratio: – injection slurry: 100…

Expansive, super-fluid cementitious binder for mixing injection slurry, mortar…

Strengthening with innovative systems

Mapei structural strengthening systems are characterised by their high mechanical performance properties and guarantee quick installation, reduced thicknesses and practically no additional weight.