TERMÉKEK

Fenntartható jövő közös építése

Mostantól ön is a részese lehet

Mostantól olyan termékeket is választhat, amelyek CO2-kibocsátását teljes mértékben kompenzálják! *
Válassza a fenntarthatóságot minden projektjéhez a Mapei segítségével.
* Az "éghajlatváltozásra gyakorolt zéró hatás" a Mapei számára azt jelenti, hogy a Zero termékcsaládba tartozó termékek teljes életciklusa során az életciklus-elemzés (LCA) módszerével mért, EPD-vel igazolt és tanúsított CO2-kibocsátást megfelelő mennyiségű tanúsított szén-dioxid-kibocsátási egység beszerzésével kompenzáljuk, amely támogatja a megújuló energiaforrásokat és az erdővédelmi projekteket. Ezáltal elkötelezetté válunk a bolygó, az emberek és a biológiai sokféleség védelme iránt.

logo-co2-zero

Now you can also choose to live with zero impact* on climate change.
Choose sustainability for all your projects, with Mapei.
*For Mapei, "zero impact on climate change" means that CO2 emissions measured throughout the life cycle of products from the Zero line in 2023 using Life Cycle Assessment (LCA) methodology, verified and certified with EPDs, have been offset through the acquisition of certified carbon credits in support of renewable energy and forestry protection projects. A commitment to the planet, to people and to biodiversity. For more details on how emissions are calculated and on climate mitigation projects financed through certified carbon credits, click here.

Kerámia és kőanyagok

Kerámia burkolólapok beépítésekor olyan ragasztókat és fugákat válasszon, amelyek CO2 maradékkibocsátását teljes mértékben ellensúlyozzák megújuló energiaforrásokkal és erdőtelepítési projektekkel.
KERAFLEX EASY S1 ZERO

KERAFLEX EASY S1 ZERO

The adhesive for large format slabs on large floor surfaces, with ZERO impact* on climate change.
High-performance, easy to apply, deformable grey cementitious adhesive with extended open time, with high back-buttering capacities, very low emission of volatile organic compounds and offset Greenhouse Gas emissions. It is particularly recommended for bonding large-sized tiles over large areas of flooring, may be applied in layers up to 10 mm thick.

EXCELLENT BACK-BUTTERING CAPACITY

DEFORMABLE

EASY TO APPLY

IDEAL FOR INSTALLING LARGE FORMATS OVER LARGE AREAS OF FLOORING

KERAFLEX MAXI S1 ZERO

KERAFLEX MAXI S1 ZERO

MAXI performance, ZERO impact* on climate change adhesive.
Special high performance, deformable, non-slip grey adhesive with extended open time, Low Dust technology, very low emission of volatile organic compounds and with Greenhouse Gas emissions offset, for tiles up to 15 mm thick and for bonding ceramic tiles and large stone tiles.

ZERO DROP IN THICKNESS

EXCELLENT WORKABILITY

DEFORMABLE

IDEAL FOR INSTALLING LARGE FORMATS

KERAFLEX EXTRA S1 ZERO

KERAFLEX EXTRA S1 ZERO

The versatile adhesive with a thixotropic or fluid consistency with ZERO impact* on climate change.
High-performance, deformable grey cementitious adhesive with variable rheology, with no vertical slip or with high back-buttering capacities, extended open time, with very low emission of volatile organic compounds and offset Greenhouse Gas emissions, for ceramic tiles and stone tiles including in large format.

EXCELLENT BACK-BUTTERING CAPACITY

NO VERTICAL SLIPPING

DEFORMABLE

IDEAL FOR INSTALLING LARGE FORMATS

ULTRACOLOR PLUS

ULTRACOLOR PLUS

ZERO impact* grout that withstands time. New colours for every room.
High performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. ULTRACOLOR PLUS is CO2 Neutral, zero impact on climate change.

WATER-REPELLENT AND EASY TO CLEAN (DROPEFFECT® TECHNOLOGY)

GROUTED AREAS ARE QUICKLY READY FOR USE

MOULD-RESISTANT (BIOBLOCK® TECHNOLOGY)

ANTI-EFFLORESCENCE FOR UNIFORM COLOUR

ULTRALITE S1 FLEX ZERO

ULTRALITE S1 FLEX ZERO

The lightweight deformable ZERO impact* on climate change adhesive to make tilers’ work easier, ideal for installing large format tiles.
One-component, high-performance, deformable, lightweight, grey cementitious adhesive with no vertical slip and extended open time, Low Dust technology and extremely high yield, with very low emission of volatile organic compounds and offset Greenhouse Gas emissions. Easy to apply by trowel with high back-buttering capacities for ceramic and stone tiles. Ideal for large-format tiles.

EASIER TO APPLY AND TRANSPORT

VERY HIGH YIELD

EXCELLENT BACK-BUTTERING CAPACITY

IDEAL FOR INSTALLING LARGE FORMATS

Habarcsok helyreállításhoz

A beton javításához, simításához és védelmére olyan habarcsokat és cementtartalmú rendszereket válasszon, amelyek maradék CO2 kibocsátását teljes mértékben ellensúlyozzák megújuló energiaforrásokkal és erdőtelepítési projektekkel.
Mapefer 1K Zero

MAPEFER 1K ZERO

One-component anti-corrosion cementitious mortar with ZERO impact* for protecting steel reinforcement.
One-component mortar made from cementitious binders, powdered polymers and corrosion inhibitors and is applied to steel reinforcement to prevent the formation of rust and as an adhesion promoter for mortar used to repair concrete.

PROTECTION OF REINFORCING BARS

VERY LOW EMISSION OF VOC

ONE-COMPONENT PRODUCT

Mapegrout 430 Zero

MAPEGROUT 430 ZERO

Fibre-reinforced fine-grained thixotropic mortar with ZERO impact*.
Pre-blended, compensated-shrinkage mortar in powder form made from cementitious binders, selected fine-grained aggregates, special additives and synthetic fibres according to a formula developed in the MAPEI R&D laboratories. It is used to reintegrate concrete around steel reinforcement in degraded concrete structures and may be applied with a continuous-feed mortar pump.

EASY TO APPLY

ALSO CONTINUOUS MIXING

NATURAL FINE-GRAINED FINISH

EXCELLENT FLEXURAL FATIGUE BEHAVIOUR

Mapegrout Tissotropico Zero

MAPEGROUT THIXOTROPIC ZERO

Fibre-reinforced compensated-shrinkage mortar with ZERO impact* for repairing concrete.
For repairing horizontal and vertical surfaces on degraded concrete structures; may be applied in thick layers without using formwork. It is a pre-blended mortar in powder form made from high-strength cement, selected aggregates, special additives and synthetic fibres according to a formula developed in the MAPEI R&D laboratories.

EASY TO APPLY

EXCELENT WORKABILITY

STRUCTURAL RESTORATION

EXCELLENT FLEXURAL FATIGUE BEHAVIOUR

Mapegrout Ripara Facile Zero

MAPEGROUT EASY REPAIR ZERO

Thixotropic mortar resistant to aggressive sulphates with ZERO impact* for repairing concrete.
One-component, pre-blended, fibre-reinforced, compensated-shrinkage, thixotropic mortar in powder form made from high-strength cement, selected aggregates and special super-plasticising additives according to a formula developed in the MAPEI R&D laboratories. Suitable for repairing degraded concrete structures, including those exposed to aggressive sulphates, and particularly recommended for repairing structures overlooking the sea.

ALSO CONTINUOUS MIXING

NATURAL FINE-GRAINED FINISH

RESISTANT TO SULPHATE AGGRESSION

EXCELLENT FLEXURAL FATIGUE BEHAVIOUR

Mapegrout Colabile Zero

MAPEGROUT HI-FLOW ZERO

Fibre-reinforced compensated-shrinkage mortar with ZERO impact* for repairing concrete.
Pre-blended mortar in powder form made from high-strength cement, selected aggregates, special additives and synthetic fibres according to a formula developed in the MAPEI R&D laboratories. Suitable for repairing structures where particular thicknesses or conformations of degraded concrete need to be reintegrated with hi-flow mortar and for anchoring machinery or metal structures accurately in position.

HIGH FLUIDITY

DOESN'T NEED VIBRATION

HIGH MECHANICAL PERFORMANCE

EXCELLENT FLEXURAL FATIGUE BEHAVIOUR

Planitop Rasa & Ripara Zero

PLANITOP SMOOTH & REPAIR ZERO

One-component rapid-set thixotropic mortar with ZERO impact*.
One-component, thixotropic cementitious mortar used for non-structural repairs and skimming internal and external, horizontal and vertical concrete surfaces and is suitable for repairing structures exposed to the air and in permanent contact with water. It is made from special hydraulic binders, selected fine-grained aggregates, polyacrylonitrile synthetic fibres, synthetic polymers and special additives according to a formula developed in the MAPEI R&D laboratories.

2 PRODUCTS IN 1

NATURAL FINE-GRAINED FINISH

APPLICABLE AT LOW THICKNESS

EXCELLENT FLEXURAL FATIGUE BEHAVIOUR

Planitop Rasa & Ripara R4 Zero

PLANITOP SMOOTH & REPAIR R4 ZERO

Rapid-set thixotropic R4-class structural cementitious mortar with ZERO impact*.
One-component, thixotropic cementitious mortar made from special highly reactive hydraulic binders, selected fine-grained aggregates, polyacrylonitrile synthetic fibres, synthetic polymers and special additives according to a formula developed in the MAPEI R&D laboratories. PLANITOP SMOOTH&REPAIR R4 ZERO is suitable for structural repairs and skimming internal and external horizontal and vertical concrete surfaces; suitable for repairing structures exposed to the air and in permanent contact with water.

2 PRODUCTS IN 1

STRUCTURAL RESTORATION

APPLICABLE AT LOW THICKNESS

EXCELLENT FLEXURAL FATIGUE BEHAVIOUR

Mapefill Zero

MAPEFILL ZERO

Plastic mortar with positive internal stress with ZERO impact*.
Pre-blended mortar in powder form made from high-strength cement, selected aggregates and special additives, including an expansive agent, according to a formula developed in the MAPEI R&D laboratories. MAPEFILL ZERO is suitable for repairing degraded structures that need to be reintegrated with hi-flow mortar and for anchoring machinery or metal structures accurately in position.

HIGH FLUIDITY

EXCELLENT ADHESION

RESISTANCE TO DYNAMIC/MECHANICAL STRESS

EXCELLENT FLEXURAL FATIGUE BEHAVIOUR

2806-Keraflex-Easy-S1-zero-g-25kg-int-9400563

MAPEGROUT EASY FLOW ZERO

Thixotropic mortar resistant to sulphates and highly resistant to cracking with ZERO impact*.
One-component, pre-blended, thixotropic cementitious mortar made from sulphate-resistant hydraulic binders, polyacrylonitrile synthetic fibres, organic corrosion inhibitors, special expansive additives, water retainers and selected aggregates according to a formula developed in the MAPEI R&D laboratories. Thanks to its particular formulation the product has excellent fatigue behaviour under dynamic flexural loading.

HIGH MECHANICAL PERFORMANCE

RESISTANT TO SULPHATE AGGRESSION

GOOD PUMPABILITY, INCLUDING OVER LONG DISTANCES

EXCELLENT FLEXURAL FATIGUE BEHAVIOUR

Maradjon kapcsolatban velünk

Iratkozzon fel hírlevelünkre, így nem marad le a Mapei friss híreiről

FELIRATKOZÁS
FELIRATKOZÁS