1. Concrete Admixtures - 
Accelerators: Dynamon Series                 


Retarders: Mapetards
Mapecure SRA

2. Waterproofing Solution - Foundation - 
Sheet Membrane: Spider P SA




HDPE Membrane Slab: Mapeproof AL AP 


SA Bitumen Membrane: Mapethene HT AP 

FPO Membrane: Mapeproof FBT

3. Waterproofing - Integral -
Crystaline:
Idrocrete KR 1000

4. Waterproofing - Integral -  
Pore Blocker: Idrocrete WP 

5. Waterproofing - Wet Area - 
Cement-based
Mapelastic ZERO

Cement-based: Planiseal 388

2-comp cementitious mortar waterproofing.
Impermeable to water and certified to be used below covering, resistant to UV and aggresive substance from penetrating the concrete. Certified as Concrete Protection EN1504-2 PI-MC-IR.

Two-component, polymer-modified, highly flexible, cementitious waterproofing membrane. 

Two-component, polymer-modified, cementitious mortar for waterproofing

6. Waterproofing - Roof - 
Sheet Membrane TPO:
Mapeplan TM

Pure Polyurea: Purtop 1000

7. Flooring: 
Floor Hardener Liquid:
Mapecrete Li-HARDENER

Self-levelling Mortar: Ultratop




Epoxy SL: Mapefloor | 302 SL

Epoxy Coating:  Mapecoat | 62W /

Epoxy AS:  Mapefloor | 360 AS

Lithium-based liquid hardener, floor densifier, to create a durable and abrasion resistant floor. To be applied by spray or pour it to the surface and wait until it penerates.


Ultra-fast setting, self-levelling mortar based on special hydraulic binders for abrasion-resistant flooring, thickness from 5 to 40mm. 


2-comp self levelling Epoxy flooring. Suitable for self-levelling and/or multi-layer resin flooring with smooth or anti-slip finish with good abrasion and chemical resistance performance. Thickness 1 - 2 mm.


Two-component, water dispersed epoxy coating with a gloss finish. 


2-comp Self-Levelling Epoxy Anti-static dissipative flooring. Electrical Resistivity 106 < RE < 109 ohm. Anti-static flooring system including anti-static primer and copper band. Thickness 2 - 3 mm.

Two-component, self-levelling epoxy formulation used to form electrically conducitive dissipative coatings according to ESD requirements. 

Rapid-hardening paintable polyurethane sealant and adhesive with a high modulus of elasticity for movements up to 20%

9. Tank Coating -  
Cement-based:
Mapelastic ZERO 

Pure Polyurea:
Purtop 1000

2-comp cementitious mortar waterproofing. 
Impermeable to water and certified to be used below covering, resistant to UV and agreesive substance from penetrating the concrete. Certified as Concrete Protection EN1504-2 PI-MC-IR

Two-component, solvent-free pure polyurea membrane applied by spray with a high-pressure, bi-mixer type pump, to form waterproof coatings for hydraulic works, roofs and bridge decks directly on site. 

Two component, anti-acid epoxy paint modified with hydrocarbide resin for protecting concrete and steel surfaces. 


Epoxy novolac coating with high chemical resistance, to be applied on top of waterproofing layer.

Epoxy non-toxic coating, to be applied on top of waterproofing layer.

Sheet Membrane Multi-purpose, LDPE membrane for damp-proofing and for screed separation.

2-comp fluid Epoxy thixotropic structural adhesive for structral bonding and repair.

2-comp fluid Epoxy resin for strucutral filling in conrete cracks and gaps. Liquid-form. 

2-comp Epoxy adhesive for construction joints and monolithic surface cracks. Thixotropic paste.

13. Concrete Repair - 
Mapefill 318

Mapegrout Patch 218


Mapegrout Thixotropic

Multi-purpose cementitious grout. Dual-stage expansion, shrink-conpensated. Normal setting time, with high strength cement, graded 1.2mm aggregates and special additives. 

General purpose, shrinkage-controlled, fibre-reinforced, patch repair mortar.

Shrink-conpensated, fibre-reinforced grout material. Applicable for vertical surface without formwork (thickness 3 to 5 cm per layer)

14. Chemical Anchor - 
Mapefix EP 50

Epoxy resin for structural chemical anchor