Cementitious adhesive with no vertical slip and extended
open time for the installation of ceramic tiles. TECHNICAL DATA: Mixing ratio: 100 parts of TIXOBOND PLUS with 28-30 parts of water. Pot…
Cementitious adhesive with no vertical slip and extended
open time for the…
White cementitious adhesive with no vertical slip and long
open time for ceramic tiles. TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 30 minutes. Waiting time before grouting: - on…
White cementitious adhesive with no vertical slip and long
open time for…
Grey cementitious adhesive with no vertical slip and long
open time for ceramic tiles. TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 30 minutes. Waiting time before grouting: - on…
Grey cementitious adhesive with no vertical slip and long
open time for…
Fibre-reinforced, compensated-shrinkage mortar for
repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT THIXOTROPIC E with 15.5-16.5 parts…
Fibre-reinforced, compensated-shrinkage mortar for
repairing concrete.…
Osmotic cementitious mortar suitable for contact with drinking water, for waterproofing masonry and concrete structures. TECHNICAL DATA: Consistency: powder. Pot life of mix: approx. 1 h.…
Osmotic cementitious mortar suitable for contact with drinking water, for…
Ultra-fast setting and curing hydraulic binder for stopping water leaks. TECHNICAL DATA: Consistency: fine powder. Workability time at +20°C: approximately 1 minute. Storage: 12 months in its…
Ultra-fast setting and curing hydraulic binder for stopping water leaks.…
High-performance, deformable cementitious adhesive with extended open time and no vertical slip for ceramic tiles and stone material including in large format. TECHNICAL DATA: Pot life of mix: more…
High-performance, deformable cementitious adhesive with extended open time and…
Pre-blended, ready-to-use industrial hardener for concrete
floors made from special quartz in a granulometric curve, Portland cement and
special additives. TECHNICAL
DATA: Colour of mix: grey,…
Pre-blended, ready-to-use industrial hardener for concrete
floors made from…
Salt-resistant, fillerized, lime and ECO-POZZOLAN-based hydraulic binder for making super-fluid injection slurry for consolidating masonry. TECHNICAL DATA: Maximum size of aggregate: 100 µm. Mixing…
Salt-resistant, fillerized, lime and ECO-POZZOLAN-based hydraulic binder for…
Two-component epoxy primer with fillers. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix: viscous fluid. Density of mix (kg/m³):…
Two-component epoxy primer with fillers. TECHNICAL DATA: Mixing ratio:…
Two-component epoxy binder used for preparing trowelled mortar with a damp earth consistency for industrial floors. TECHNICAL DATA: Mixing ratio: comp. A: comp. B = 100 : 50. Colour of mix:…
Two-component epoxy binder used for preparing trowelled mortar with a damp…
Transparent, silane and siloxane water-repellent impregnator in watery solution. TECHNICAL DATA: Consistency: fluid liquid. Colour: milky. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Active…
Transparent, silane and siloxane water-repellent impregnator in watery…
Curing liquid admixture for reducing the hydraulic shrinkage of concrete Where to use – Industrial floorings in concrete for indoors and outdoors. – Ready-mix and precast concrete where it is…
Curing liquid admixture for reducing the hydraulic shrinkage of concrete Where…
Super-fluid, salt-resistant, lime and ECO-POZZOLAN-based, hydraulic binder with fillers applied by injection for consolidating masonry. TECHNICAL DATA: Maximum diameter of aggregate: 100 µm. Mixing…
Super-fluid, salt-resistant, lime and ECO-POZZOLAN-based, hydraulic binder with…
Indoor and outdoor cementitious levelling mortar for walls, ceilings and floors. TECHNICAL DATA: Consistency of mix: pasty. Application temperature range: from +5°C to +30°C. Pot life: 2 hours.…
Indoor and outdoor cementitious levelling mortar for walls, ceilings and…
