Stud for fixing insulating panels and composite insulating systems in place, with a plug with a metal/nylon pin and polypropylene body. TECHNICAL DATA: Composition: synthetic material with…
Stud for fixing insulating panels and composite insulating systems in place,…
High performance liquid foaming agent, based on biodegradable anionic surfactants, in combination with a natural lubricating polymer, for ground conditioning in mechanized tunneling
High performance liquid foaming agent, based on biodegradable anionic…
Alkali-free accelerator for shotcrete Where to use • Securing surfaces during tunnelling. • Inner lining even in presence of very squeezing soils. • Shotcrete for structural tunnel repairs. •…
Alkali-free accelerator for shotcrete Where to use • Securing surfaces during…
Salt-resistant, lime and ECO-POZZOLAN hydraulic binder mixed with aggregates in various grain sizes to make de-humidifying render and masonry mortar. TECHNICAL DATA: Mixing ratio: – 0.5-2.5 mm sand:…
Salt-resistant, lime and ECO-POZZOLAN hydraulic binder mixed with aggregates in…
Two-component ready-mixed, high ductility pozzolan-reaction, fibre-reinforced mortar for structural “reinforced” strengthening work, when used in combination with mesh from the MAPEGRID line, and for…
Two-component ready-mixed, high ductility pozzolan-reaction, fibre-reinforced…
Synthetic waterproofing membrane Where to use • Drill and blast tunnel waterproofing. • Open cut tunnel waterproofing. • Underground structures waterproofing. Packaging Mapeplan TU S is supplied in…
Synthetic waterproofing membrane Where to use • Drill and blast tunnel…
Synthetic waterproofing membrane Where to use • Drill and blast tunnel waterproofing. • Open cut tunnel waterproofing. • Underground structures waterproofing. Packaging Mapeplan TU is supplied in 20…
Synthetic waterproofing membrane Where to use • Drill and blast tunnel…
High-protection, thick-layered acrylic coating product with high filling properties for internal and external surfaces. Available in the following granulometries: 0.7 mm, 1.2 mm, 1.5 mm and 2.0 mm.…
High-protection, thick-layered acrylic coating product with high filling…
TPE tape for flexible sealing and waterproofing of expansion joints and cracks subject to movement. TECHNICAL DATA: Sizes available: – 17 cm (MAPEBAND TPE 170); – 32.5 cm (MAPEBAND TPE 325). Width of…
TPE tape for flexible sealing and waterproofing of expansion joints and cracks…
Highly protective, mould and mildew-resistant acrylic coating product with, for internal and external surfaces. Available in the following granulometries: 1.2 mm and 1.5 mm. TECHNICAL DATA:…
Highly protective, mould and mildew-resistant acrylic coating product with, for…
Highly protective transpirant, water-repellent, mildew and mould-resistant siloxane coating product for internal and external surfaces. Available in the following granulometries: 0.7 mm and 1.2 mm.…
Highly protective transpirant, water-repellent, mildew and mould-resistant…
Hygienising detergent in watery solution. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dilution rate: diluted up to 300% of water.…
Hygienising detergent in watery solution. TECHNICAL DATA: Consistency: fluid…
One-component pre-blended thixotropic mortar with controlled shrinkage for anchoring, by injection, of tie rods and bolts in all types of grounds. Use Stabilcem T for anchoring tie rods of any length…
One-component pre-blended thixotropic mortar with controlled shrinkage for…
Two-component epoxy primer for priming cementitious bridge deck substrates before waterproofing with an asphalt or synthetic membrane layer. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1.…
Two-component epoxy primer for priming cementitious bridge deck substrates…
High-strength, cementitious sulphate binder for making fluid slurry and/or super-fluid injection mortar. Stabilcem ARS is used for making fluid slurry, mortar and beton applied by injection or…
High-strength, cementitious sulphate binder for making fluid slurry and/or…
Expansive admix for controlled-shrinkage concrete. TECHNICAL DATA: Dosage: add between 5 and 8% on the amount of cement in the mix. Packaging: 20 kg vacuum-packed polyethylene bags.
Expansive admix for controlled-shrinkage concrete. TECHNICAL DATA: Dosage: add…
