Curing admixture for cementitious mortar and concrete to reduce hydraulic shrinkage and the formation of micro-cracks. TECHNICAL DATA: Consistency: liquid. Storage: 12 months. Consumption: – mortar:…
Curing admixture for cementitious mortar and concrete to reduce hydraulic…
Permanent encapsulation of asbestos cement. Use Aquaflex System cycle for the permanent encapsulation of type A (external view), B (internal view) and C (no view, before confinement) in compliance…
Permanent encapsulation of asbestos cement. Use Aquaflex System cycle for the…
Easy-to-apply, high-performance cementitious adhesive with good back-buttering properties, for ceramic and stone tiles. Very low emission level of volatile organic compounds. Particularly suitable…
Easy-to-apply, high-performance cementitious adhesive with good back-buttering…
One-component, fibre-reinforced, cementitious mortar for restoring and repairing sewerage systems. Sewament 10 is used for the cortical restoration of damaged precast or placed concrete urban water…
One-component, fibre-reinforced, cementitious mortar for restoring and…
Two-component, transparent, non-yellowing epoxy coatings applied at a thickness of 1 mm for finishing coats on epoxy resin systems. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 100 : 50. Colour…
Two-component, transparent, non-yellowing epoxy coatings applied at a thickness…
Fast-setting and hardening one-component cementitious mortar for repairing and protecting sewerage systems. It can be applied manually or by dry spray. Sewament 40 is used for the cortical…
Fast-setting and hardening one-component cementitious mortar for repairing and…
Synthetic latex rubber mixed with sand and cement (thickness up to 5 mm). TECHNICAL DATA: Pot life of mix: 90 minutes. Open time: 20 minutes. Waiting time before grouting: - on walls: 4-6 hours; - on…
Synthetic latex rubber mixed with sand and cement (thickness up to 5 mm).…
Thinners for PRIMER PU60. TECHNICAL DATA: Consistency: liquid. Colour: transparent. Inflammable: yes. Storage: 12 months. Consumption: 0.25-1 litre per litre of PRIMER PU60 according to dilution rate…
Thinners for PRIMER PU60. TECHNICAL DATA: Consistency: liquid. Colour:…
Alkali-free accelerator for shotcrete Where to use • Securing surfaces during tunnelling. • Inner lining even in presence of very squeezing soils. • Shotcrete for structural tunnel repairs. •…
Alkali-free accelerator for shotcrete Where to use • Securing surfaces during…
Admixture for enhancing the pumpability of concrete Where to use Thanks to its special formula, Mapeplast PMX makes the cement mix highly cohesive. Mapeplast PMX is especially recommended for: –…
Admixture for enhancing the pumpability of concrete Where to use Thanks to its…
