Two-component, water-based base coat, enhancing wood natural beauty and warmth, with very low emission of volatile organic compounds (VOC) and no NMP, for wooden floors. Where to use: Preparation of…
Two-component, water-based base coat, enhancing wood natural beauty and warmth,…
Pumping aid admixture for concretes Where to use Mapestart 1 has to be mixed with water. Add 20-35 l of water for each bag (nearly 225 g) of Mapestart 1. The quantity of Mapestart 1, i.e. the number…
Pumping aid admixture for concretes Where to use Mapestart 1 has to be mixed…
One-component primer for polyurethane sealants for absorbent substrates. Technical data: Application of sealant: after 60 minutes. Colour: transparent straw yellow. Consumption: 6-9 g/m (1 cm - deep…
One-component primer for polyurethane sealants for absorbent substrates.…
Alkali-free setting accelerator for shotcrete Where to use Mapequick 067 FFG is suitable for application by both wet-mix and dry-mix spraying system and, thanks to its acceleration properties and…
Alkali-free setting accelerator for shotcrete Where to use Mapequick 067 FFG is…
Superplasticizer for ready mixed concrete with high reduction of mixing water Where to use Because of its high workability (consistency classes S4 or S5 according to EN 206-1) and reduced amount of…
Superplasticizer for ready mixed concrete with high reduction of mixing water…
Two part water-based co-polymeric paint for the protection of cementitious substrates Where to use Preparing the substrate Surfaces to be treated must be fully cured (even freshly patched areas),…
Two part water-based co-polymeric paint for the protection of cementitious…
Liquid product used as anti-wear agent for drilling and mechanized tunnelling Where to use Drilling Mapedrill F.R.A. 02 is added to the water-based drilling fluid, in order to prevent typical…
Liquid product used as anti-wear agent for drilling and mechanized tunnelling…
Liquid foaming agent based on biodegradable surfactants combined with natural polymer for mechanized tunnelling with TBM Description Polyfoamer WT is a liquid foaming agent based on biodegradable,…
Liquid foaming agent based on biodegradable surfactants combined with natural…
Alkali-free setting accelerator for shotcrete Where to use Mapequick 069 FFG is suitable for application by both wet-mix and dry-mix spraying system and, thanks to its acceleration properties and…
Alkali-free setting accelerator for shotcrete Where to use Mapequick 069 FFG is…
Superplasticizer for ready mix concrete with high reduction of mixing water Where to use Thanks to its special, innovative formulation, Dynamon Q10 is an efficient agent used to disperse cement…
Superplasticizer for ready mix concrete with high reduction of mixing water…
Liquid accelerator for shotcrete Where to use • Securing surfaces during tunnelling. • Shotcrete for structural tunnel repairs. • Shotcrete applications with high mechanical performance. • Shotcrete…
Liquid accelerator for shotcrete Where to use • Securing surfaces during…
Liquid suspension of amorphous silica fume to be employed for very high quality concretes and grouts Where to use Mapeplast NS 40 can be employed for: • Sprayed concrete characterized by high…
Liquid suspension of amorphous silica fume to be employed for very high quality…
