Two-component, thixotropic, fibre-reinforced, cementitious mortar with a low modulus of elasticity and added organic corrosion inhibitor for repairing concrete, applied in a single layer at a…
Two-component, thixotropic, fibre-reinforced, cementitious mortar with a low…
Macro-porous, salt-resistant dehumidifying, lime and ECO-POZZOLAN based render for repairing existing masonry, including on buildings of historical interest. TECHNICAL DATA: Maximum size of…
Macro-porous, salt-resistant dehumidifying, lime and ECO-POZZOLAN based render…
Styrene-free, polyester resin chemical fastener for heavy loads. TECHNICAL DATA: Suitable substrates: all full or perforated substrates. Recommended penetration technique: drill or hammer-drill.…
Styrene-free, polyester resin chemical fastener for heavy loads. TECHNICAL…
Styrene-free, hybrid vinyl resin-based chemical anchor for structural loads. Certified for threaded bar, construction bars and C1 seismic loads. TECHNICAL DATA: Suitable substrates: all solid and…
Styrene-free, hybrid vinyl resin-based chemical anchor for structural loads.…
Two-component, water-dispersed, matt epoxy finish for treating the surface of cementititous substrates. TECHNICAL DATA: Mixing ratio: comp A : comp B = 20 : 80. Consistency of mix: fluid. Workability…
Two-component, water-dispersed, matt epoxy finish for treating the surface of…
Virgin, mono-filament polypropylene fibres for mortar and concrete, available in diameters of 12 and 18 mm. TECHNICAL DATA: Dosage: 0.4-0.8 kg m ³ of concrete or mortar. Packaging: boxes of 30x0.6 kg…
Virgin, mono-filament polypropylene fibres for mortar and concrete, available…
Mono-filament, virgin polypropylene fibres with a length of 12 and 18 mm, for concrete Where to use: Mapefibre NS12 is particularly suitable for the following: production of concrete used for…
Mono-filament, virgin polypropylene fibres with a length of 12 and 18 mm, for…
Aerating product for concrete and cementitious mortar. TECHNICAL DATA: Dosage: – concrete: from 15 to 100 ml every 100 kg of cement. – cementitious mortar: from 100 to 300 ml every 100 kg of binder.…
Aerating product for concrete and cementitious mortar. TECHNICAL DATA: Dosage:…
Salt-resistant masonry mortar, made from natural hydraulic lime and ECO-POZZOLAN, for installation layers and pointing on “natural finish” masonry. TECHNICAL DATA: Maximum size of aggregate: 1.5 mm.…
Salt-resistant masonry mortar, made from natural hydraulic lime and…
High-strength, quick-setting pozzolan mortar with very low water absorption for grouting paved floors with joints from 5 to 30 mm wide subject to heavy loads and intense traffic. TECHNICAL DATA: Pot…
High-strength, quick-setting pozzolan mortar with very low water absorption for…
Bulk water-repellent admixture. Particularly recommended for concrete with a damp earth consistency. TECHNICAL DATA: Dosage: from 0.2 to 0.6 kg every 100 kg of cement. Packaging: 25 kg tanks.
Bulk water-repellent admixture. Particularly recommended for concrete with a…
Hydro-expanding bentonite jointing material for sealing construction joints. TECHNICAL DATA: Shape: pre-formed tape. Size: 20x25 mm. Storage: 24 months. Application temperature range: from -5°C to…
Hydro-expanding bentonite jointing material for sealing construction joints.…
Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material (minimum width of joints 1 mm). TECHNICAL DATA: Pot…
Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…
Two-component, solvent-free, spray applied, hybrid polyurea
membrane applied on site using a high-pressure, bi-mixer type pump to form
waterproof coatings on roofs.
