Elastic, water-repellent, mildew and mould-resistant, hygienising, elastomeric coating product for internal and external surfaces. Available in the following grain sizes: 1.2 mm. TECHNICAL DATA:…
Elastic, water-repellent, mildew and mould-resistant, hygienising, elastomeric…
Waterproof, easy-to-clean acrylic paint for internal and external surfaces in permanent contact with water. TECHNICAL DATA: Consistency: thick liquid. Colour: colours from the colour chart range…
Waterproof, easy-to-clean acrylic paint for internal and external surfaces in…
Two-component, super-fluid epoxy resin for injections and anchorings. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: 40 minutes (at +23°C). Classification: EN 1504-5 and EN…
Two-component, super-fluid epoxy resin for injections and anchorings. TECHNICAL…
Two-component epoxy resin with a very low viscosity for injecting into micro-cracks, also on wet surfaces. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: 35 minutes (at…
Two-component epoxy resin with a very low viscosity for injecting into…
Solvent-free accelerator for epoxy primers. TECHNICAL DATA: Appearance: liquid. Colour: light yellow. Density: 0.97 g/m³. Viscosity at +23°C: 200 mPa·s. Consumption: 2-3% of the total weight of the…
Solvent-free accelerator for epoxy primers. TECHNICAL DATA: Appearance: liquid.…
Expansive admix for controlled-shrinkage concrete. TECHNICAL DATA: Dosage: add between 5 and 8% on the amount of cement in the mix. Packaging: 20 kg vacuum-packed polyethylene bags.
Expansive admix for controlled-shrinkage concrete. TECHNICAL DATA: Dosage: add…
Plasticizing and anti-shrinkage agent for slurries for injection Where to use Expanfluid can be used in preparing: – grouts for filling the casings of post-tensioning cables in pre-stressed concrete;…
Plasticizing and anti-shrinkage agent for slurries for injection Where to use…
Keep in touch
