Project Banja Hydropower Plant, Banjë

Banja Hydropower Plant

Banjë, Albania

Ref #: 7075

Category: INFRASTRUCTURES


Yard	repairing concrete and sealing joints
Location	Banjë, Albania
Subcategory	DAM
Built in	2013
Opened in	2016
Application	supplying admixtures for concrete and products for waterproofing and repairing concrete
Start and finish date	2014/2016
Application Type	Supplying of admixtures, Waterproofing
Client	Devoll Hydropower Sh.A, Statkraft AS
Contractor company	Limak
Credits	Statkraft AS
MAPEI Coordination	Roberto Saccone and Pasquale Zaffaroni, Mapei SpA (Italy)

Product used for the project

ADESILEX PG1

Two-component, rapid-setting thixotropic adhesive for structural bonds. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 35 minutes (at +23°C). Minimum applicable…

Two-component, rapid-setting thixotropic adhesive for structural bonds. …

DYNAMON SP1

Super-plasticizers based on a modified acrylic polymer for precast concrete with low water/cement ratio and very high mechanical strengths at early and final age Where to use Dynamon SP1 is…

Super-plasticizers based on a modified acrylic polymer for precast concrete…

EPOJET LV

Two-component epoxy resin with a very low viscosity for injecting into micro-cracks, also on wet surfaces. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: 35 minutes (at…

Two-component epoxy resin with a very low viscosity for injecting into…

EPORIP

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked screeds. TECHNICAL DATA: Consistency: comp. A: fluid paste; comp. B: fluid paste. Colours: comp. A: black; comp. B: white.…

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked…

MAPEFAST CF/L

Chloride-free anti-freeze admixture to ensure regular setting times of cementitious mortar and concrete at temperatures down to -10°C. Also suitable for pre-compressed concrete. TECHNICAL DATA:…

Chloride-free anti-freeze admixture to ensure regular setting times of…

Two-component, castable polyurethane sealant for sealing joints in roads up to surface level, mixed with QUARTZ 0.5 sand at a ratio of up to 1:1 by weight. Setting and hardening may be accelerated by…

Two-component, castable polyurethane sealant for sealing joints in roads up to…

MAPEGROUT T60

Fibre-reinforced, sulphate-resistant thixotropic mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT T60 with 16.5-17.5 parts…

Fibre-reinforced, sulphate-resistant thixotropic mortar for repairing concrete.…

MAPEPLAST SF

Silica fume-based admixture with pozzolanic action Where to use Mapeplast SF can be used for the following applications: • High quality thixotropic mortar, resistant even under the most severe…

Silica fume-based admixture with pozzolanic action Where to use Mapeplast SF…

MAPETARD

Retardant admixture for concrete and mortar with a plasticising effect. Retardant action on setting times of cement. Particularly suitable for use in summer to help maintain workability of the mix.…

Retardant admixture for concrete and mortar with a plasticising effect.…

RESFOAM 1KM

One-component, ultra-fluid polyurethane resin applied by injection for waterproofing structures and ground and rocks subject to intense percolating water. The reaction time may be regulated.…

One-component, ultra-fluid polyurethane resin applied by injection for…