Project Olten high school, Olten

Olten high school

Olten, Switzerland

Ref #: 7112

Category: PUBLIC BUILDINGS/PLACES


Yard	facades and stairs
Location	Olten, Switzerland
Subcategory	SCHOOL
Built in	1969
Opened in	1871
Application	Supply of products for repair concrete and strengthen structures
Start and finish date	2016/2022
Application Type	Concrete restoration
Client	Solothurn Canton, Department for building and justice services
Contractor company	STRABAG AG
Architects	Marc Funk, Hans Ulrich Fuhrimann, Batimo AG Architekten SIA
MAPEI Coordination	Roger Schär, Mapei Suisse

Product used for the project

ADESILEX PG2

Two-component, rapid-setting thixotropic adhesive for structural bonds. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 35 minutes (at +23°C). Minimum applicable…

Two-component, rapid-setting thixotropic adhesive for structural bonds. …

COLORITE BETON

Semi-transparent, anti-carbonatation acrylic paint with a smooth finish for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: colours from the colour chart range or…

Semi-transparent, anti-carbonatation acrylic paint with a smooth finish for…

ELASTOCOLOR PITTURA

Elastomeric, crack-bridging, permanently flexible, protective paint with high resistance to chemicals for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or…

Elastomeric, crack-bridging, permanently flexible, protective paint with high…

EPORIP

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked screeds. TECHNICAL DATA: Consistency: comp. A: fluid paste; comp. B: fluid paste. Colours: comp. A: black; comp. B: white.…

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked…

MALECH

Water-based acrylic undercoat and bonding promoter with a smooth finish. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids…

Water-based acrylic undercoat and bonding promoter with a smooth finish.…

MAPEFER 1K ZERO

MAPEFER 1K ZERO is a one-component mortar made from cementitious binders, powdered polymers and corrosion inhibitors and is applied to steel reinforcement to prevent the formation of rust and as an…

MAPEFER 1K ZERO is a one-component mortar made from cementitious binders,…

MAPEFILL E

Fluid expansive mortar for anchoring objects in place. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEFILL with 14-15 parts of water. Pot life of mix:…

Fluid expansive mortar for anchoring objects in place. TECHNICAL DATA: Maximum…

MAPEFINISH HD

Two-component, highly sulphate resistant cementitious mortar to protect concrete subjected to high abrasion

Two-component, highly sulphate resistant cementitious mortar to protect…

MAPEGROUT 430

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing concrete.

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar…

MAPEGROUT THIXOTROPIC

Fibre-reinforced, compensated-shrinkage mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT TISSOTROPICO with 15.5-16.5 parts…

Fibre-reinforced, compensated-shrinkage mortar for repairing concrete.…

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA: Consistency: fluid liquid. Dry solids content: 36%. Storage: 24 months. Consumption: – for adhesive slurry: 100-150 g/m²; –…

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA:…

PLANITOP SMOOTH & REPAIR R4

Quick-setting, fibre-reinforced, compensated-shrinkage, thixotropic cementitious mortar for repairing and smoothing concrete, applied in various thicknesses of from 3 to 40 mm in a single layer.

Quick-setting, fibre-reinforced, compensated-shrinkage, thixotropic…