Project Sandro Pertini Theatre Bresso, Bresso


Yard	theatre, waterproof
Location	Bresso, Italy
Subcategory	THEATRE
Application	The use of our waterproofing materials, adhesives and protective coatings in the first building reconstruction in Italy with EU funds provided by the “Recovery and Resilience Facility” (RRF)
Start and finish date	2024
Application Type	Waterproofing
Contractor company	Multimanutenzione S.r.l.
Architects	Fortunato Businaro
MAPEI Coordination	Andrea Serafin, Davide Dido, Marco Cattuzzo, Fabio Bergamaschi

DURSILITE MATT

Transpirant, high opacity, washable water-based wall paint for internal use. TECHNICAL DATA: Consistency: thick liquid. Colours: white or various colours using the ColorMap ® automatic colouring…

Transpirant, high opacity, washable water-based wall paint for internal use.…

MAPECOAT TNS EXTREME is a two-component , rapid-drying epoxy-acrylic resin in water dispersion with selected fillers specifically formulated in the Mapei Research & Development laboratories to create…

MAPECOAT TNS EXTREME is a two-component , rapid-drying epoxy-acrylic resin in…

MAPECOAT TNS EXTREME SF

Two-component epoxy-acrylic rapid-drying coloured topcoating for pedestrians areas, cycle lanes as well as sport surfaces

Two-component epoxy-acrylic rapid-drying coloured topcoating for pedestrians…

MAPECOAT TNS PRIMER EPW

Solvent-free, two-component epoxy primer in water dispersion

MAPEFER 1K ZERO

MAPEFER 1K ZERO is a one-component anti-corrosion cementitious mortar to be applied on reinforcement rods to prevent the formation of rust and as an adhesion promoter for concrete repair mortars.

MAPEFER 1K ZERO is a one-component anti-corrosion cementitious mortar to be…

MAPEFINISH

Two-component cementitious mortar for finishing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 4 parts of MAPEFINISH comp. A with 1 part of MAPEFINISH comp. B. Pot…

Two-component cementitious mortar for finishing concrete. TECHNICAL DATA:…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPETHERM AR1 GG

One-component, large-grained cementitious mortar for bonding and levelling insulation panels and for thermal insulation systems. TECHNICAL DATA: Consistency: powder. Colour: grey and white Density of…

One-component, large-grained cementitious mortar for bonding and levelling…

PLANITOP SMOOTH & REPAIR

Quick-setting, fibre-reinforced, compensated-shrinkage, thixotropic cementitious mortar for repairing and smoothing concrete, applied in various thicknesses of from 3 to 40 mm in a single layer.…

Quick-setting, fibre-reinforced, compensated-shrinkage, thixotropic…

This product replaces PLANITOP RASA & RIPARA ZERO

PRIMER 3296

Acrylic primer in water dispersion with high penetration, consolidating and anti-dust properties for screeds. TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1: 1 or 1:2…

Acrylic primer in water dispersion with high penetration, consolidating and…

PRIMER SN

Two-component epoxy primer with fillers. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix: viscous fluid. Density of mix (kg/m³):…

Two-component epoxy primer with fillers. TECHNICAL DATA: Mixing ratio:…

PURTOP EASY

One-component, elastic polyurethane waterproofing membrane.

QUARZOLITE BASE COAT

Coloured acrylic undercoat with a smooth finish and good filling and adhesion promoting properties, for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or…

Coloured acrylic undercoat with a smooth finish and good filling and adhesion…

SILANCOLOR CLEANER PLUS

Hygienising detergent in watery solution. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dilution rate: diluted up to 300% of water.…

Hygienising detergent in watery solution. TECHNICAL DATA: Consistency: fluid…

TOPCEM PRONTO

TOPCEM PRONTO is a ready-mixed mortar , easy to use with high thermal conductivity, for high-efficiency heated floors . Dries more quickly than normal sand/cement screeds to make your work simpler…

TOPCEM PRONTO is a ready-mixed mortar , easy to use with high thermal…

TRIBLOCK P

Three-component epoxy-cementitious primer for non-absorbent waterproofing damp substrates. TECHNICAL DATA: Consistency: comp. A liquid; comp. B liquid; comp. C powder. Colours: comp. A white; comp. B…

Three-component epoxy-cementitious primer for non-absorbent waterproofing damp…

ULTRABOND ECO V4SP

Multi-purpose, acrylic adhesive in water dispersion with a long open time and very low emission level of volatile organic compounds (VOC), for laying rubber, PVC, vinyl, polyolephinic, linoleum and…

Multi-purpose, acrylic adhesive in water dispersion with a long open time and…