Project Borgo del Forte, Forte dei Marmi


Yard	swimming-pools
Location	Forte dei Marmi, Italy
Subcategory	SWIMMING POOL
Built in	2011
Opened in	2012
Application	waterproofing and mosaics installation
Application Type	Waterproofing
Client	soc. immobiliare Rosbelli srl
Contractor company	IR Costruzioni
Architects	Studio Mardini
MAPEI Distributor	Dini & Denna
Credits	Sergio Fortuna
Project Manager	arch. Edmondo Nardini

ADESILEX P10

High-performance, white cementitious adhesive with no vertical slip and extended open time for glass mosaic, ceramic and marble coatings (thickness of adhesive up to 5 mm). TECHNICAL DATA: Pot life…

High-performance, white cementitious adhesive with no vertical slip and…

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials.

High-performance cementitious adhesive with no vertical slip and extended open…

ISOLASTIC

Elasticizing latex for cement-based adhesives. Consumption: 1-2 kg/m2 depending on the trowel used. Packaging: 5, 10, 25 kg drums. Storage: 24 months in its original packaging.

Elasticizing latex for cement-based adhesives. Consumption: 1-2 kg/m2 depending…

Pre-blended, high-performance polymer-modified cementitious mortar for grouting joints 4 to 15 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes.…

Pre-blended, high-performance polymer-modified cementitious mortar for grouting…

KERAFLEX MAXI S1

High-performance, deformable cementitious adhesive with no vertical slip, extended open time, excellent workability and Low Dust technology for ceramic tiles, particularly recommended for bonding…

High-performance, deformable cementitious adhesive with no vertical slip,…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. Packaging: – 120 mmx50 m rolls; –…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPEFINISH

Two-component cementitious mortar for finishing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 4 parts of MAPEFINISH comp. A with 1 part of MAPEFINISH comp. B. Pot…

Two-component cementitious mortar for finishing concrete. TECHNICAL DATA:…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPESIL LM

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone…

NIVOPLAN PLUS

Indoor and outdoor cementitious levelling mortar for walls, ceilings and floors. TECHNICAL DATA: Consistency of mix: pasty. Application temperature range: from +5°C to +30°C. Pot life: 2 hours.…

Indoor and outdoor cementitious levelling mortar for walls, ceilings and…

PLANICRETE

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA: Consistency: fluid liquid. Dry solids content: 36%. Storage: 24 months. Consumption: – for adhesive slurry: 100-150 g/m²; –…

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA:…

PROSFAS

Water-based, solvent-free consolidator with high penetration properties for cementitious substrates. TECHNICAL DATA: Consistency: liquid. Colour: transparent. Drying time: according to the absorbency…

Water-based, solvent-free consolidator with high penetration properties for…

TOPCEM

Special normal-setting, quick-drying (4 days), controlled-shrinkage hydraulic binder for screeds. TECHNICAL DATA: Recommended mixing ratio: 200÷250 kg of TOPCEM with 1 m³ of aggregates (diameter from…

Special normal-setting, quick-drying (4 days), controlled-shrinkage hydraulic…

ELASTORAPID

Product not available for this market,
contact us

Borgo del Forte

Product used for the project

Keep in touch

Borgo del Forte

Construction

Product used for the project

ELASTORAPID

Keep in touch