Project Leisure, sport & event center Tägi, Wettingen, Wettingen


Yard	Tile works on a surace of over 4000 m2
Location	Wettingen, Switzerland
Subcategory	SPORT CENTER
Application	Delivery of products for the ceramic tiles
Start and finish date	2018/2020
Application Type	Floor/wall covering
Contractor company	Tägi AG, Wettingen
Installer companies	Fehlmann AG, Hunzenschwil; Anliker AG Bauunternehmung, Luzern
Architects	Scheitlin Syfrig Architekten, Luzern
Credits	Daniela Schöni, Aarau/Lenzburg
MAPEI Coordination	Raffael Schöni

ADESILEX PG4

Two-component, thixotropic, epoxy adhesive with modied rheology for bonding Mapeband and Mapeband TPE, PVC braces, Hypalon and for structural bonding

Two-component, thixotropic, epoxy adhesive with modied rheology for bonding…

EPORIP

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked screeds. TECHNICAL DATA: Consistency: comp. A: fluid paste; comp. B: fluid paste. Colours: comp. A: black; comp. B: white.…

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked…

KERAPOXY CLEANER

Special cleaning solution for epoxy grout, suitable for cleaning operations after completing laying work and for removing traces and stains of epoxy grout (such as KERAPOXY, KERAPOXY P, KERAPOXY…

Special cleaning solution for epoxy grout, suitable for cleaning operations…

MAPEFLOOR I 914

Two-component epoxy primer for priming cementitious bridge deck substrates before waterproofing with an asphalt or synthetic membrane layer. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1.…

Two-component epoxy primer for priming cementitious bridge deck substrates…

MAPEGROUT 430

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing concrete.

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar…

MAPEGROUT THIXOTROPIC

Fibre-reinforced, compensated-shrinkage mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT TISSOTROPICO with 15.5-16.5 parts…

Fibre-reinforced, compensated-shrinkage mortar for repairing concrete.…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANIGROUT 300

Three-component fluid epoxy mortar for anchorage work. TECHNICAL DATA: Maximum dimension of aggregate: 2 mm. Mixing ratio: comp. A : comp. B : comp. C = 16 : 6 : 100. Pot life of mix: 1 hour (at…

Three-component fluid epoxy mortar for anchorage work. TECHNICAL DATA: Maximum…

PLANITOP FAST 330

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities. TECHNICAL DATA: Where to use:…

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…

PRIMER MF

Two-component, solvent-free epoxy primer used as bonding promoter for products from the MAPEFLOOR range, for consolidating and waterproofing against residual damp on cementitious substrates and as…

Two-component, solvent-free epoxy primer used as bonding promoter for products…

PRIMER SN

Two-component epoxy primer with fillers. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix: viscous fluid. Density of mix (kg/m³):…

Two-component epoxy primer with fillers. TECHNICAL DATA: Mixing ratio:…

QUARTZ 0.25 0.5 1.9

Quartz sand used as a “filler” and/or for “sprinkling” on epoxy systems. TECHNICAL DATA: Colour: light grey. Maximum size of inerts: 0.25 mm.

Quartz sand used as a “filler” and/or for “sprinkling” on epoxy systems.…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar free from Portland cement with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…

ULTRATOP

Self-levelling, ultra-quick hardening mortar with special hydraulic binders, applied at a thickness between 5 and 40 mm to create abrasion-resistant floors. TECHNICAL DATA: Colour: white, beige,…

Self-levelling, ultra-quick hardening mortar with special hydraulic binders,…