Project Melchtal Resort, Melchtal, Melchatal

Melchtal Resort, Melchtal

Melchatal, Switzerland

Ref #: 4643

Category: TOURISM AND WELLNESS


Yard	Floor & wall coverings (ceramic tiles and natural stone)
Location	Melchatal, Switzerland
Subcategory	HOTEL/INN
Application	All the tiles and natural stone in the restaurant, bedrooms, bathrooms, spa and facade were installed and grouted with suitable Mapei products.
Start and finish date	2018/2022
Application Type	Floor/wall covering
Contractor company	Gisler GU AG, Lucerne
Installer companies	DS Keramik GmbH, Hünenberg
Credits	Melchtal Resort
Project Manager	Guido Gisler
MAPEI Coordination	Beat Niederhauser

Product used for the project

ADESILEX PG4

Two-component, thixotropic, epoxy adhesive with modied rheology for bonding Mapeband and Mapeband TPE, PVC braces, Hypalon and for structural bonding

Two-component, thixotropic, epoxy adhesive with modied rheology for bonding…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide.

Pre-blended, high-performance, polymer-modified cementitious mortar with…

MAPEGUM WPS

Quick-drying flexible liquid membrane for waterproofing internal surfaces. TECHNICAL DATA: Consistency: paste. Density of the mix: 1.45 g/cm³. pH: 9. Dry solids content: 73%. Storage: 24 months.…

Quick-drying flexible liquid membrane for waterproofing internal surfaces.…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

PLANITOP FAST 330

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities. TECHNICAL DATA: Where to use:…

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar free from Portland cement with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…