Project San Matteo Church, Castellamare di Stabia

San Matteo Church

Castellamare di Stabia, Italy

Ref #: 5043

Category: PUBLIC BUILDINGS/PLACES


Yard	restoration
Location	Castellamare di Stabia, Italy
Subcategory	CHURCH
Built in	2011
Opened in	2012
Application	façades restoration and interior natural stones installation
Application Type	Concrete restoration
Client	rev. Antonio d'Esposito
Contractor company	Costruzioni Iaccarino
Architects	arch. Guglielmo Esposito
MAPEI Distributor	D'Amora srl
Credits	Alessandro Salzano
Project Manager	arch. Matteo Viesti

Product used for the project

ANTIPLUVIOL S

Ultra high-performance, transparent, siloxane resin water-repellent impregnator. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 0.8. Active…

Ultra high-performance, transparent, siloxane resin water-repellent…

GRANIRAPID

Two-component, high-performance, deformable, quick-setting and drying cementitious adhesive for ceramic tiles and stone material (thickness of adhesive up to 10 mm). TECHNICAL DATA: Consistency:…

Two-component, high-performance, deformable, quick-setting and drying…

KERANET

Acid-based cleaning solution for ceramic tiles. Particularly recommended for eliminating lime efflorescence and for the final cleaning step of Tuscany terracotta. In powder (concentrated) or liquid…

Acid-based cleaning solution for ceramic tiles. Particularly recommended for…

MALECH

Water-based acrylic undercoat and bonding promoter with a smooth finish. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids…

Water-based acrylic undercoat and bonding promoter with a smooth finish.…

MAPEFER

Two-component, anti-corrosion cementitious mortar for steel reinforcement rods. TECHNICAL DATA: Maximum dimension of aggregate: 0.5 mm. Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix:…

Two-component, anti-corrosion cementitious mortar for steel reinforcement rods.…

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA: Consistency: fluid liquid. Dry solids content: 36%. Storage: 24 months. Consumption: – for adhesive slurry: 100-150 g/m²; –…

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA:…

PLANITOP 530

Lime-cement skimming mortar with a fine-textured, natural finish for render and concrete. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 100 parts of PLANITOP 530 with 24-27…

Lime-cement skimming mortar with a fine-textured, natural finish for render and…

PLANITOP SMOOTH & REPAIR

Quick-setting, fibre-reinforced, compensated-shrinkage, thixotropic cementitious mortar for repairing and smoothing concrete, applied in various thicknesses of from 3 to 40 mm in a single layer.…

Quick-setting, fibre-reinforced, compensated-shrinkage, thixotropic…

SILANCOLOR PRIMER

Transpirant siloxane undercoat with a smooth finish. TECHNICAL DATA: Consistency: fluid liquid. Colour: milky. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids content (EN ISO 3251) (%):…

Transpirant siloxane undercoat with a smooth finish. TECHNICAL DATA:…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar free from Portland cement with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…