Paintable polyurethane sealant with a low modulus of elasticity for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.24 N/mm². Shore A…
Paintable polyurethane sealant with a low modulus of elasticity for movements…
Closed-cell, extruded foam polyethylene cord used as a support for elastomer sealants to gauge the correct size of flexible joints. Supplied in rolls in various lengths according to the diameter of…
Closed-cell, extruded foam polyethylene cord used as a support for elastomer…
Powder alkali-free setting accelerator for shotcrete Where to use • Securing surfaces during tunnelling. • Inner lining even in presence of very squeezing soils. • Shotcrete for structural tunnel…
Powder alkali-free setting accelerator for shotcrete Where to use • Securing…
Acid-based cleaning solution for ceramic tiles. Particularly recommended for eliminating lime efflorescence and for the final cleaning step of Tuscany terracotta. In powder (concentrated) or liquid…
Acid-based cleaning solution for ceramic tiles. Particularly recommended for…
Two-component, shiny epoxy finish in water dispersion for anti-dust and anti-grease treatments on concrete floors, cementitious substrates and as a finishing coat on epoxy systems. TECHNICAL DATA:…
Two-component, shiny epoxy finish in water dispersion for anti-dust and…
Silica fume-based admixture with pozzolanic action Where to use Mapeplast SF can be used for the following applications: • High quality thixotropic mortar, resistant even under the most severe…
Silica fume-based admixture with pozzolanic action Where to use Mapeplast SF…
System for colouring MAPEFLOOR I 300 SL, MAPEFLOOR I 500 W, MAPEFLOOR PU 410, PRIMER SN, MAPEFLOOR DECOR 700, MAPEFLOOR I 360 AS and MAPEFLOOR I 390 EDF. N.B.: other RAL colours available upon…
System for colouring MAPEFLOOR I 300 SL, MAPEFLOOR I 500 W, MAPEFLOOR PU 410,…
High viscosity ultra rapid setting two-component polyurethane resin, to be injected for consolidating and waterproofing of structures subject to strong water ingress Where to use • Waterproofing rock…
High viscosity ultra rapid setting two-component polyurethane resin, to be…
Expansive, super-fluid cementitious binder for mixing injection slurry, mortar and concrete. TECHNICAL DATA: Mixing ratio: – injection slurry: 100 parts of STABILCEM with 32 parts of water; – mortar,…
Expansive, super-fluid cementitious binder for mixing injection slurry, mortar…
Two-component, polyurethane finishing product in water dispersion with low yellowing properties, for anti-dust and anti-oil treatments. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 87 : 13.…
Two-component, polyurethane finishing product in water dispersion with low…
One-component, normal-setting cementitious mortar for smoothing concrete and cementitious render. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 100 parts of MONOFINISH with…
One-component, normal-setting cementitious mortar for smoothing concrete and…
Two-component, epoxy-polyurethane adhesive for resilient and textile flooring on internal and external absorbent and non-absorbent substrates. Specifically developed for the installation of rubber…
Two-component, epoxy-polyurethane adhesive for resilient and textile flooring…
Medium-strength (40 MPa), compensated-shrinkage fibre-reinforced thixotropic mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of…
Two-component, anti-corrosion cementitious mortar for steel reinforcement rods. TECHNICAL DATA: Maximum dimension of aggregate: 0.5 mm. Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix:…
Two-component, anti-corrosion cementitious mortar for steel reinforcement rods.…
Anti-evaporation agent in water emulsion for protecting the surface of concrete against quickly drying out when exposed to sunlight and winds. TECHNICAL DATA: Application: spray. Consumption: – neat:…
Anti-evaporation agent in water emulsion for protecting the surface of concrete…