Project Csillaghegyi Árpád Forrásfürdő, Budapest

Csillaghegy Árpád Spring bath

Budapest, Hungary

Ref #: 1

Category: TOURISM AND WELLNESS

Construction


Yard	baths and swimming.pools
Location	Budapest, Hungary
Subcategory	SWIMMING POOL
Application	supply of products for waterproofing and ceramic tiles installation
Start and finish date	2018
Application Type	Floor/wall covering, Waterproofing
Client	Budapest Spas cPlc.
Contractor company	Kalotherm Zrt.
Installer companies	AG Total Solutions Kft.; Filó és Társa Ltd.
Architects	YBL Tervező Kft.
MAPEI Distributor	AG Total Solutions Kft.
Credits	Kecskeméti Dávid
MAPEI Coordination	Hugyecsek György

Product used for the project

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials (layer of adhesive up to 5 mm). The white version has very high white balance…

High-performance cementitious adhesive with no vertical slip and extended open…

EPOJET

Two-component, super-fluid epoxy resin for injections and anchorings. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: 40 minutes (at +23°C). Classification: EN 1504-5 and EN…

Two-component, super-fluid epoxy resin for injections and anchorings. TECHNICAL…

KERABOND T

Cementitious adhesive with no vertical slip for ceramic tiles (thickness of adhesive up to 5 mm). TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 20 minutes. Waiting time before…

Cementitious adhesive with no vertical slip for ceramic tiles (thickness of…

KERAFLEX MAXI S1

High-performance, deformable cementitious adhesive with no vertical slip, extended open time, excellent workability and Low Dust technology for ceramic tiles, particularly recommended for bonding…

High-performance, deformable cementitious adhesive with no vertical slip,…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

NIVOPLAN

Smoothing mortar for internal and external walls and ceilings for thicknesses from 2 to 20 mm. TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings. Workability time: 2-3…

Smoothing mortar for internal and external walls and ceilings for thicknesses…

RESFOAM 1KM

One-component, ultra-fluid polyurethane resin applied by injection for waterproofing structures and ground and rocks subject to intense percolating water. The reaction time may be regulated.…

One-component, ultra-fluid polyurethane resin applied by injection for…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints 2 to 20 mm wide.…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…