Project Ocean Park Aqua City and Grand Aquarium,

Ocean Park Aqua City and Grand Aquarium

Hong Kong

Ref #: 852019

Category: COMMERCIAL


Yard	swimming-pools and commercial areas
Location	Hong Kong
Subcategory	Aquatic Centre
Application	tiles installation and grouting for internal and external wall covering
Start and finish date	2009/2011
Application Type	Floor/wall covering
Client	Ocean Park Hong Kong
Contractor company	Leighton Contractors (Asia) Ltd.
Installer companies	Ming Sang Eng. Ltd., Themework HK Ltd.
Architects	Aedas
MAPEI Distributor	Mapei China Ltd. (Hong Kong)
Link to details page	http://www.mapei.com/adv/HK/Ocean_Park/

Product used for the project

ADESILEX P10

High performance white cementitious adhesive, with no vertical slip and extended open time for glass, ceramic and marble mosaic

High performance white cementitious adhesive, with no vertical slip and…

ADESILEX P9

The “historic” adhesive that never ages! For more than 60 years Mapei experience at the service of installers on sites all around the world . Recommended for every type of ceramic tile , mosaic and…

The “historic” adhesive that never ages! For more than 60 years Mapei…

Elasticising latex mixed with KERABOND, KERABOND T and ADESILEX P10. When KERABOND, KERABOND T and KERABOND PLUS are mixed with ISOLASTIC they form a high-performance, highly deformable adhesive with…

Elasticising latex mixed with KERABOND, KERABOND T and ADESILEX P10. When…

KERACOLOR FF

High-performance, polymer-modified, water-repellent, cementitious grout with DropEffect® technology for joints up to 6 mm

High-performance, polymer-modified, water-repellent, cementitious grout with…

KERACOLOR GG

Pre-blended, high-performance polymer-modified cementitious mortar for grouting joints 4 to 15 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes.…

Pre-blended, high-performance polymer-modified cementitious mortar for grouting…

KERACOLOR SF

KERACOLOR SF is a fine-grained , high-performance , cementitious mortar for grouting joints up to 4 mm . Mixed with the Fugolastic admixture, it reaches a level of strength which makes it suitable…

KERACOLOR SF is a fine-grained , high-performance , cementitious mortar for…

KERACRETE

Synthetic latex rubber mixed with sand and cement (thickness up to 5 mm). TECHNICAL DATA: Pot life of mix: 90 minutes. Open time: 20 minutes. Waiting time before grouting: - on walls: 4-6 hours; - on…

Synthetic latex rubber mixed with sand and cement (thickness up to 5 mm).…

KERALASTIC T

Two-component, high-performance polyurethane adhesive with no vertical slip for ceramic tiles and stone material. TECHNICAL DATA: Open time: 50 minutes. Waiting time before grouting: 12 hours. Set to…

Two-component, high-performance polyurethane adhesive with no vertical slip for…

KERAPOXY

KERAPOXY is a two-component acid-resistant high-performance epoxy grout for grouting ceramic tiles and stone material, for joints of at least 1 mm . Can also be used as an adhesive.

KERAPOXY is a two-component acid-resistant high-performance epoxy grout for…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

PULICOL

Solvent gel to remove adhesives and paint. Where to use: - Removal of old natural and synthetic resin based adhesives and paint. - Cleaning old adhesives from marble and ceramic flooring, levelling…

Solvent gel to remove adhesives and paint. Where to use: - Removal of old…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints 2 to 20 mm wide.…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…