Project Sliezsky dom, Tatranská Polianka


Yard	hotel and spa
Location	Tatranská Polianka, Slovakia
Subcategory	HOTEL/INN
Built in	2009
Opened in	2010
Application	supply of products for waterproofing and ceramic installation
Application Type	Floor/wall covering
Client	Across Wealth Management, o.c.p., a.s.
Contractor company	Elevation, s.r.o.
Installer companies	JMK Lipany
MAPEI Distributor	MAPEI SK, s.r.o.

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials (layer of adhesive up to 5 mm). The white version has very high white balance…

High-performance cementitious adhesive with no vertical slip and extended open…

KERACOLOR FF

High-performance, polymer-modified, water-repellent, cementitious grout with DropEffect® technology for joints up to 6 mm

High-performance, polymer-modified, water-repellent, cementitious grout with…

KERAFLEX

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic and stone tiles (thickness of adhesive up to 5 mm). TECHNICAL DATA: Pot life of mix: more than 8 hours.…

High-performance cementitious adhesive with no vertical slip and extended open…

MAPEBAND

Rubber tape with alkali-resistant fabric for cementitious waterproofing systems and liquid membrane. TECHNICAL DATA: In service temperature range: from -20°C to +60°C. Packaging: – 50 m rolls of 120…

Rubber tape with alkali-resistant fabric for cementitious waterproofing systems…

MAPECOAT I 24

Two-component epoxy paint for anti-acid coatings on concrete surfaces. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Colour of mix: white, grey (Ral 7001) and neutral. Application…

Two-component epoxy paint for anti-acid coatings on concrete surfaces.…

MAPEGROUT TISSOTROPICO

Fibre-reinforced, compensated-shrinkage mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT TISSOTROPICO with 15.5-16.5 parts…

Fibre-reinforced, compensated-shrinkage mortar for repairing concrete.…

MAPELASTIC

Two-component cementitious mortar, fiber-reinforce, flexible down to -20°C, for waterproofing balconies, terraces, bathrooms and swimming pools

Two-component cementitious mortar, fiber-reinforce, flexible down to -20°C, for…

MAPEPRIM SP

Two-component, solvent-free primer for smoothing compounds and adhesives on non-absorbent surfaces. TECHNICAL DATA: Consistency: comp. A: liquid; comp. B: liquid. Colours: comp. A: blue; comp. B:…

Two-component, solvent-free primer for smoothing compounds and adhesives on…

MONOFINISH

One-component, normal-setting cementitious mortar for smoothing concrete and cementitious render. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 100 parts of MONOFINISH with…

One-component, normal-setting cementitious mortar for smoothing concrete and…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints 2 to 20 mm wide.…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…