Project detail


Yard	Zateplovací systém, Hydroizolácia, Inštalácia obkladov, dlažieb a mozaiky
Location	Bratislava, Slovakia
Subcategory	RESIDENCE
Built in	2008
Opened in	2010
Application	Zateplovací systém, Hydroizolácia, Inštalácia obkladov, dlažieb a mozaiky
Application Type	New building
Client	DOAS, a.s.
Contractor company	DOAS, a.s.
Installer companies	A-keramika, a.s.
MAPEI Distributor	MAPEI SK, s.r.o.

ADESILEX P10

High-performance, white cementitious adhesive with no vertical slip and extended open time for glass mosaic, ceramic and marble coatings (thickness of adhesive up to 5 mm). TECHNICAL DATA: Pot life…

High-performance, white cementitious adhesive with no vertical slip and…

ANTIPLUVIOL S

Ultra high-performance, transparent, siloxane resin water-repellent impregnator. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 0.8. Active…

Ultra high-performance, transparent, siloxane resin water-repellent…

FUGOLASTIC

Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL DATA OF FUGOLASTIC + KERACOLOR: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to…

Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL…

Elasticising latex mixed with KERABOND, KERABOND T and ADESILEX P10. When KERABOND, KERABOND T and KERABOND PLUS are mixed with ISOLASTIC they form a high-performance, highly deformable adhesive with…

Elasticising latex mixed with KERABOND, KERABOND T and ADESILEX P10. When…

KERABOND T

Cementitious adhesive with no vertical slip for ceramic tiles (thickness of adhesive up to 5 mm). TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 20 minutes. Waiting time before…

Cementitious adhesive with no vertical slip for ceramic tiles (thickness of…

KERACOLOR FF

High-performance, polymer-modified, water-repellent, cementitious grout with DropEffect® technology for joints up to 6 mm

High-performance, polymer-modified, water-repellent, cementitious grout with…

KERACOLOR SF

Fine-grained, high-performance white cementitious mortar for grouting joints up to 4 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to…

Fine-grained, high-performance white cementitious mortar for grouting joints up…

KERALASTIC

Two-component, high-performance polyurethane adhesive for ceramic tiles and stone material. TECHNICAL DATA: Open time: 50 minutes. Waiting time before grouting: 12 hours. Set to light foot traffic:…

Two-component, high-performance polyurethane adhesive for ceramic tiles and…

KERANET

Acid-based cleaning solution for ceramic tiles. Particularly recommended for eliminating lime efflorescence and for the final cleaning step of Tuscany terracotta. In powder (concentrated) or liquid…

Acid-based cleaning solution for ceramic tiles. Particularly recommended for…

MAPEBAND

Rubber tape with alkali-resistant fabric for cementitious waterproofing systems and liquid membrane. TECHNICAL DATA: In service temperature range: from -20°C to +60°C. Packaging: – 50 m rolls of 120…

Rubber tape with alkali-resistant fabric for cementitious waterproofing systems…

MAPEFINISH

Two-component cementitious mortar for finishing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 4 parts of MAPEFINISH comp. A with 1 part of MAPEFINISH comp. B. Pot…

Two-component cementitious mortar for finishing concrete. TECHNICAL DATA:…

MAPEFLEX PU40

Paintable polyurethane sealant with a low modulus of elasticity for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.24 N/mm². Shore A…

Paintable polyurethane sealant with a low modulus of elasticity for movements…

MAPEFOAM

Closed-cell, extruded foam polyethylene cord used as a support for elastomer sealants to gauge the correct size of flexible joints. Supplied in rolls in various lengths according to the diameter of…

Closed-cell, extruded foam polyethylene cord used as a support for elastomer…

MAPEGROUT TISSOTROPICO

Fibre-reinforced, compensated-shrinkage mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT TISSOTROPICO with 15.5-16.5 parts…

Fibre-reinforced, compensated-shrinkage mortar for repairing concrete.…

MAPELASTIC

Two-component cementitious mortar, fiber-reinforce, flexible down to -20°C, for waterproofing balconies, terraces, bathrooms and swimming pools

Two-component cementitious mortar, fiber-reinforce, flexible down to -20°C, for…

MAPEPRIM SP

Two-component, solvent-free primer for smoothing compounds and adhesives on non-absorbent surfaces. TECHNICAL DATA: Consistency: comp. A: liquid; comp. B: liquid. Colours: comp. A: blue; comp. B:…

Two-component, solvent-free primer for smoothing compounds and adhesives on…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

MAPESIL LM

Neutral silicone sealant for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm². Shore A hardness: 21. Workability time: 15 minutes.…

Neutral silicone sealant for movements up to 25%. TECHNICAL DATA: Movement in…

MONOFINISH

One-component, normal-setting cementitious mortar for smoothing concrete and cementitious render. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 100 parts of MONOFINISH with…

One-component, normal-setting cementitious mortar for smoothing concrete and…

PLASTIMUL

Bitumen waterproofing emulsion for general purpose use. TECHNICAL DATA: Consistency: thick paste. Density: 1.2 g/cm³. pH: 10. Dry solids content: approx. 76%. Storage: 12 months. Minimum application…

Bitumen waterproofing emulsion for general purpose use. TECHNICAL DATA:…