Products for Cementitious & Resin Flooring

The products from this line enable you to create floors of the highest technical and aesthetic quality for a vast range of uses. In fact, numerous settings can benefit from innovative flooring resistant to abrasion, impact loads, cracking and aggressive chemical agents.

Products for Cementitious & Resin Flooring

Select a product category

Auxiliary Products for Flooring

Flooring Solutions

Primers/Bonding Promoters

Underlayments / Concrete Preparation

MAPECEM

Special quick-setting and drying (24 hours), controlled-shrinkage hydraulic binder for screeds. TECHNICAL DATA: Recommended mixing ratio: 350-450 kg…

Special quick-setting and drying (24 hours), controlled-shrinkage hydraulic…

MAPECEM PRONTO

Pre-blended, ready-to-use, quick-setting and drying (24 hours), controlled-shrinkage mortar for screeds. Applications: For the formation of both…

Pre-blended, ready-to-use, quick-setting and drying (24 hours),…

MAPECRETE LI HARDENER

Surface treatment in liquid form made from lithium silicate with a consolidating effect, for new or old concrete floors and concrete surfaces…

Surface treatment in liquid form made from lithium silicate with a…

MAPETOP N AR6

Pre-blended, ready-to-use industrial hardener for concrete floors made from special quartz in a granulometric curve, Portland cement and special…

Pre-blended, ready-to-use industrial hardener for concrete floors made from…

PLANITOP SMOOTH & REPAIR R4 ZA

Structural R4-class, rapid-setting, shrinkage-compensated, thixotropic, fibre-reinforced, cementitious mortar, applied in a single layer from 3 to 40…

Structural R4-class, rapid-setting, shrinkage-compensated, thixotropic,…

TOPCEM

Special fast setting hydraulic binder for the preparation of normal setting and fast drying (4 days) screeds with controlled shrinkage. Applications:…

Special fast setting hydraulic binder for the preparation of normal setting and…

TOPCEM PRONTO

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds. TECHNICAL DATA: Mixing…

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal…

ULTRAPLAN ECO 20

Rapid hydrating, fast-drying self-levelling smoothing compound. Where to use: Ultraplan Eco 20 is used in interiors for levelling and smoothing…

Rapid hydrating, fast-drying self-levelling smoothing compound. Where to use:…

ULTRAPLAN MAXI

Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 3 to 40 mm. TECHNICAL DATA: Where to use: internal floors for ceramic,…

Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 3…

ULTRATOP

Ultra-quick setting self-levelling mortar based on special hydraulic binders, for abrasion-resistant floor coverings at a thickness from 5 to 40 mm.…

Ultra-quick setting self-levelling mortar based on special hydraulic binders,…

ULTRATOP LIVING

Self-levelling, ultra-quick setting mortar with special hydraulic binders, applied at a thickness between 5 and 15 mm to create abrasion-resistant…

Self-levelling, ultra-quick setting mortar with special hydraulic binders,…

Ultraplan Eco

Ultra-fast hardening self-levelling smoothing compound with very low VOC content. Applications: Interior levelling of new and existing substrates, as…

Ultra-fast hardening self-levelling smoothing compound with very low VOC…

Concrete and resin, between aesthetics and technique

The Mapei research and development laboratories have developed a series of systems for epoxy, polyurethane and cementitious floors which allow users to upgrade floors quickly and efficiently to match their real use. Our proposals are also certified according to the most severe standards and are widely used in numerous sectors of industry such as the food and chemical-pharmaceuticals industries, in contemporary surroundings, places of artistic interest, open offices and in industrial, civil and commercial settings