Multi-purpose, acrylic adhesive in water dispersion with a long open time and very low emission level of volatile organic compounds (VOC), for laying rubber, PVC, vinyl, polyolephinic, linoleum and…
Multi-purpose, acrylic adhesive in water dispersion with a long open time and…
Pre-blended, ready-to-use, quick-setting and drying (24 hours), controlled-shrinkage mortar for screeds. Applications: For the formation of both floating and bonded screeds on either old or new floor…
Pre-blended, ready-to-use, quick-setting and drying (24 hours),…
Rapid-hardening paintable polyurethane sealant and adhesive with a high modulus of elasticity for movements up to 20%. TECHNICAL DATA: Movement in service: 20%. Modulus of elasticity at 100%…
Rapid-hardening paintable polyurethane sealant and adhesive with a high modulus…
Self-adhesive butyl tape with alkali-resistant, non-woven fabric for elastic waterproofing systems. TECHNICAL DATA: Density: 1.6 g/cm³. Temperature of application: from +5°C to +30°C. Width: 100 mm.…
Self-adhesive butyl tape with alkali-resistant, non-woven fabric for elastic…
Ready-to-use, ultra quick-drying, flexible liquid membrane for waterproofing internal and external surfaces. TECHNICAL DATA: Consistency: paste. Application temperature range: from +5°C to +35°C at…
Ready-to-use, ultra quick-drying, flexible liquid membrane for waterproofing…
Agent for injection, composed of concentrated silicone micro-emulsion for creating a chemical barrier against rising damp in the masonry. Mapestop is used to form a chemical barrier against rising…
Agent for injection, composed of concentrated silicone micro-emulsion for…
Light grey, rapid setting, fine mortar for repairing and smoothing concrete and renders. Planitop 100 is used for localized repairs of precast concrete elements damaged by movement and for adjusting…
Light grey, rapid setting, fine mortar for repairing and smoothing concrete and…
Synthetic resin based primer in water dispersion. Applications: Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling.…
Synthetic resin based primer in water dispersion. Applications: Treating gypsum…
One-component adhesive for the installation of Idrostop. Idrostop Mastic is a ready-to-use solvent-free one-component MS polymer based adhesive. On extrusion, it is a thixotropic paste suitable for…
One-component adhesive for the installation of Idrostop. Idrostop Mastic is a…
Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid membranes. Applications: Flexible waterproofing of expansion joints of terraces, balconies, etc. and of wall…
Alkali-resistant rubber tape with felt for cementitious waterproofing systems…
Special fast setting hydraulic binder for the preparation of normal setting and fast drying (4 days) screeds with controlled shrinkage. Applications: Formation of floating and bonded screeds on…
Special fast setting hydraulic binder for the preparation of normal setting and…
High performance, rapid setting, deformable S1 cementitious adhesive with extended open time for the installation of ceramic, porcelain and stone tiles and mosaics TECHNICAL DATA: Pot life of mix: 60…
High performance, rapid setting, deformable S1 cementitious adhesive with…
Polyurethane sealant with high modulus of elasticity, resistant to chemicals, suitable for clean rooms and environments with food and beverages. TECHNICAL DATA: Movement in service (%): 25 (with…
Polyurethane sealant with high modulus of elasticity, resistant to chemicals,…
Two-component, solvent-free, pure polyurea membrane applied by spray with a high-pressure, bi-mixer type pump, to form waterproof coatings directly on site. TECHNICAL DATA: A/B ratio (by volume):…
Two-component, solvent-free, pure polyurea membrane applied by spray with a…
Two-component, solvent-free, spray applied, hybrid polyurea membrane applied in sito using a high-pressure, bi-mixer type pump to form waterproof coatings on bridge decks and flat roofs. TECHNICAL…
Two-component, multi-purpose, neutral-coloured epoxy treatment in water dispersion, permeable to vapour, for industrial floors. Mapefloor I 500 W is a solvent-free, two-component, epoxy filling…
Two-component, multi-purpose, neutral-coloured epoxy treatment in water…
Two-component, high-flexibility cementitious mortar, applied by brush or by roller, for waterproofing concrete surfaces such as balconies, terraces, basins and swimming pools, and for protection…
Two-component, high-flexibility cementitious mortar, applied by brush or by…
High-performance, deformable cementitious adhesive with no vertical slip, extended open time, excellent workability and Low Dust technology for ceramic tiles, particularly recommended for bonding…
High-performance, deformable cementitious adhesive with no vertical slip,…
Paintable, castable polyurethane sealant with a low modulus of elasticity for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.25 N/mm².…
Paintable, castable polyurethane sealant with a low modulus of elasticity for…
