MAPECOAT I 600W

Two-component transparent epoxy primer in water dispersion.
Mapecoat I 600 W is used to encourage bonding on absorbent and porous cementitious substrates before applying Mapefloor I 500 W (Mapefloor System 53).
Mapecoat I 600 W is a two-component, transparent epoxy primer in water dispersion.
The two components which make up Mapecoat I 600 W must be mixed together using a low-speed drill with a mixing attachment until completely blended.
When Mapecoat I 600 W is used as a primer for Mapefloor I 500 W apply in a single coat after diluting with water at a ratio of 1 : 1.
After adding the water, mix Mapecoat I 600 W with a drill for approximately 3 minutes.
Wait 3-4 hours before applying Mapefloor I 500 W.
Apply Mapecoat I 600 W with a medium-haired long-haired or roller or with an airless spray gun.

Consumption
300-500 g/m2 according to the absorption.

Packaging
5.9 kg kits (A B).

Related documentation

Technical data sheet
Download
Safety Data Sheet
Download

Last Projects MAPECOAT I 600W

Category icon COMMERCIAL FACILITIES

2017/2018

Mapletree Logistics Hub

Port of Tanjung Pelepas, Malaysia

Resin floors application, Installation of floors

Category icon SPORT FACILITIES

2019

Yuk Chai Primary School Basketball Court

Petaling Jaya, Malaysia

Solutions for sports flooring

Category icon COMMERCIAL FACILITIES

2018/2019

Cityplaza One

Taikoo Shing, Hong Kong

Waterproofing

Category icon RESIDENTIAL BUILDINGS

2018

Sol Acres Condominium

Singapore

Solutions for sports flooring

Keep in touch

Subscribe to our newsletter to get Mapei news