Project Hap Seng Business Park, Shah Alam


Yard	exterior floors, interior floors, basement carparks, bathrooms, planter boxes, water feature
Location	Shah Alam, Malaysia
Subcategory	VARIOUS
Built in	2020
Opened in	2020
Application	Waterproofing Solutions for Commercial Buildings
Start and finish date	2018/2020
Application Type	Waterproofing systems
Client	Hap Seng Land Sdn Bhd
Contractor company	Nakano Construction Sdn Bhd
Installer companies	Monarch CC Sdn Bhd
Architects	Asima Archirect Sdn Bhd
MAPEI Coordination	Aaron Ang

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material. TECHNICAL DATA: Pot life of mix: 45 minutes. Open…

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

Closed cell polyethylene foam cord for the correct sizing of movement joints. Is available in skeins where the length is proportionate to the diameter. Applications: Placing at the base of the joints…

Closed cell polyethylene foam cord for the correct sizing of movement joints.…

MAPELASTIC

Two-component flexible cementitious mortar for waterproofing concrete, balconies, terraces, bathrooms and swimming pools. Applications: Use Mapelastic to waterproof bathrooms, showers, balconies,…

Two-component flexible cementitious mortar for waterproofing concrete,…

MAPELASTIC FOUNDATION

Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to negative and positive hydraulic lift. TECHNICAL DATA: Consistency: thixotropic. Mixing ratio: comp. A: comp.…

Two-component, flexible cementitious mortar for waterproofing concrete surfaces…

MAPELASTIC SMART

Two-component, high-flexibility cementitious mortar (with crack-bridging 2 mm), applied by trowel or with a roller, for the waterproofing of balconies, basins, swimming pools and wet areas.…

Two-component, high-flexibility cementitious mortar (with crack-bridging 2…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPETEX SEL

Non-woven, macro-holed polypropylene fabric for reinforcing waterproofing membranes. Mapetex Sel is a non-woven, macro-holed fabric, made from synthetic polypropylene fibres, which is permeable to…

Non-woven, macro-holed polypropylene fabric for reinforcing waterproofing…

PRIMER 3296

Aqueous acrylic primer with excellent penetration effect for dusty screeds. Where to use: Consolidation of unsound substrates. Preparation of unsound screed surfaces before the installation of wooden…

Aqueous acrylic primer with excellent penetration effect for dusty screeds.…

PRIMER SN

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…

PURTOP 1000

Two-component, solvent-free, pure polyurea membrane applied by spray with a high-pressure, bi-mixer type pump, to form waterproof coatings directly on site. TECHNICAL DATA: A/B ratio (by volume):…

Two-component, solvent-free, pure polyurea membrane applied by spray with a…