Micrometric filler material in polyamide used to create surfaces with a non-slip finish. TECHNICAL DATA: Consistency: powder. Colour: white. Storage: 24 months. Packaging: 2 kg.
Micrometric filler material in polyamide used to create surfaces with a…
Mono-filament, virgin polypropylene fibres with a length of 12mm, for concrete Where to use: Mapefibre NS12 is particularly suitable for the following: production of concrete used for industrial…
Mono-filament, virgin polypropylene fibres with a length of 12mm, for concrete…
One-component polymer-based adhesive for installing engineered wooden boards with beads of adhesive, wooden stairs and wooden baseboards. • Solvent free • Thixotropic to reduce slipping • For wooden…
One-component polymer-based adhesive for installing engineered wooden boards…
A solvent-free, non flammable vinyl/PVC adhesive dispersed in water, with strong initial bond and long open time. Use for bonding PVC / vinyl, homogenous and heterogenous sheet or tile, semi-flexible…
A solvent-free, non flammable vinyl/PVC adhesive dispersed in water, with…
Hard set, highly shear resistant, wet-bed dispersion adhesive, specific for PVC and rubber floorings and wall coverings on absorbent substrates. Also suitable as universal adhesive for all common…
Hard set, highly shear resistant, wet-bed dispersion adhesive, specific for PVC…
Latexplan Trade Fast is a two-part rapid setting, fast drying smoothing compound. It is suitable for smoothing new and existing substrates prior to the installation of floor coverings. Latexplan…
Latexplan Trade Fast is a two-part rapid setting, fast drying smoothing…
Adhesive zinc plates applied directly on the surface of structures for galvanic cathodic protection against the corrosion of reinforcement rods in concrete. Mapeshield E 25 comprises a 99.9% pure…
Adhesive zinc plates applied directly on the surface of structures for galvanic…
Solvent-free, pressure sensitive, multi purpose adhesive, dispersed in water, with permanent tack and very low emissions of VOC. Used for both permanent and release bonding of a wide range of floor…
Solvent-free, pressure sensitive, multi purpose adhesive, dispersed in water,…
Two-component epoxy coating in water dispersion with a gloss finish to form smooth films of resin coating. Specifically developed for coating the surface of walls and ceilings in clean rooms.…
Two-component epoxy coating in water dispersion with a gloss finish to form…
Two-component solvent-free epoxy primer for damp substrates. TECHNICAL DATA: Consistency: liquid. Colour: light brown. Mixing ratio A/B (by weight): 45:55. Pot life of the mix: 35 minutes at +23°C.…
Two-component solvent-free epoxy primer for damp substrates. TECHNICAL DATA:…
Integral waterproofer for cementitious mortars. Use Idrosilex to obtain waterproof renders and screeds. Idrosilex is especially recommended for waterproofing basements, swimming-pools, reservoirs,…
Integral waterproofer for cementitious mortars. Use Idrosilex to obtain…
Paintable polyurethane sealant with a low modulus of elasticity for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.24 N/mm². Shore A…
Paintable polyurethane sealant with a low modulus of elasticity for movements…
Bituminous emulsion waterproofer and adhesive. Use Plastimul for waterproofing horizontal and vertical surfaces on foundations, retaining walls, concrete under-linings to roofs etc. Due to its…
Bituminous emulsion waterproofer and adhesive. Use Plastimul for waterproofing…
One-component trowellable fine-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect.
One-component trowellable fine-textured cementitious paste applied in layers up…
Pultrused carbon fibre plates pre-impregnated in epoxy based resin, protected by a double film of plastic. Carboplate is a range of pultrused carbon fibre plates, pre-impregnated in epoxy based…
Pultrused carbon fibre plates pre-impregnated in epoxy based resin, protected…
Two-component, thixotropic, epoxy adhesive with modified-rheology for bonding Mapeband, Mapeband TPE, PVC braces, Hypalon and for structural bonding. Adesilex PG4 is a two-component adhesive made up…
Two-component, thixotropic, epoxy adhesive with modified-rheology for bonding…
Multi-purpose, ready-to-use, synthetic resin-based bonding promoter in water dispersion with silica aggregates and very low emission of volatile organic compounds (VOC). For internal floors and…
Multi-purpose, ready-to-use, synthetic resin-based bonding promoter in water…
Brilliant white mosaic adhesive with no vertical slip and extended open time. For interior and exterior wall and floor installations of ceramic, glass and marble mosaics. Mix with ISOLASTIC for…
Brilliant white mosaic adhesive with no vertical slip and extended open time.…
