Where to use:
UltraCare Intensifier W is an innovative, water-based formulation used to preserve and enhance the colour of natural stone with medium-high absorbency, terracotta, terrazzo, marble-chip tiles, cementing tiles and engineered stone in both internal and external surroundings.
The product is not suitable for stone and engineered stone surfaces with polished finish or low absorbency (use UltraCare Intensifier S). Always carry out a preliminary test on a sample area of the surface to verify the product’s effect.
If the main requirement is to provide surfaces with a water and oil-repellent finish and to protect them against staining without an enhancing effect, it is recommended to use UltraCare Stain Protector W or UltraCare Stain Protector W Plus (please refer to respective Technical Data Sheets).
Once UltraCare Intensifier W has been applied, it is not possible to return surfaces to their original condition. Always carry out a preliminary test on a small, unexposed area of the surface, or on a sample of the material to be treated, to verify the effect it has on its finish before applying the product over the whole surface.
The treatment may be repeated after a certain period of time to maintain its effect, especially on external surfaces, and according to the type of material, its exposure to atmospheric agents and the levels of traffic and wear it has to withstand.
Do not apply the product on exposed surfaces if rain is forecast within the next few hours after application.
If the product is used in interior, make sure the room is well aerated during application and drying.
Packaging: UltraCare Intensifier W is supplied in 1 litre tanks