TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings. Workability time: 2-3 hours. Thickness applied: from 2 to 20 mm. Waiting time before laying ceramic and natural stone:…
TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings.…
Synthetic rubber latex admixture to improve mechanical strength of cementitious mixes for screeds and renders. Also for producing bonding slurries for Mapei Screeds and splatterdash coats for renders…
Synthetic rubber latex admixture to improve mechanical strength of cementitious…
TECHNICAL DATA: Maximum dimension of aggregate: 2 mm. Mixing ratio: comp. A : comp. B : comp. C = 16 : 6 : 100. Pot life of mix: 1 hour (at 23°C). Maximum applicable thickness: 5 cm per layer.…
TECHNICAL DATA: Maximum dimension of aggregate: 2 mm. Mixing ratio: comp. A :…
Planiseal CW is a one component cementitious mortar, containing crystalline promoting chemicals which penetrate the substrate and prevents the penetration of moisture. Where to use: Internal and…
Planiseal CW is a one component cementitious mortar, containing crystalline…
TECHNICAL DATA: Maximum dimension of aggregate: 0.2 mm. Mixing ratio: 100 parts of PLANITOP 100 with 26-27 parts of water. Pot life of mix: 20-30 minutes (at +20°C). Minimum applicable thickness: 1…
TECHNICAL DATA: Maximum dimension of aggregate: 0.2 mm. Mixing ratio: 100 parts…
PLANITOP 210 ZERO is a natural fine finish skim coat for levelling and finishing masonry and concrete walls, cementitious and lime-cement render, old quartz paints, scratched plastic, inside and…
PLANITOP 210 ZERO is a natural fine finish skim coat for levelling and…
Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities.
Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…
Keep in touch
