Project Aquacity Poprad, Poprad


Yard	Floor/wall coverings
Location	Poprad, Slovakia
Subcategory	Spa
Built in	2008
Opened in	2008
Application	Ceramic tiles installation
Application Type	Floor/wall coverings
Contractor company	T-design, s.r.o.
Installer companies	INGSTEEL, s.r.o.
Architects	Ing. Arch. Pavel Kučera, Ing. Arch. Filip Rubáš
MAPEI Distributor	MAPEI SK, s.r.o.
Project Manager	ARCHSTUDIO, s.r.o. Brno

ADESILEX P10

Brilliant white mosaic adhesive with no vertical slip and extended open time. For interior and exterior wall and floor installations of ceramic, glass and marble mosaics. Mix with ISOLASTIC for…

Brilliant white mosaic adhesive with no vertical slip and extended open time.…

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials. The white version has very high white balance and excellent workability.

High-performance cementitious adhesive with no vertical slip and extended open…

IDROSTOP MASTIC

Single-component adhesive for the installation of Idrostop. Idrostop Mastic is a ready to use solvent-free single-component adhesive with a base of MS polymers. On extrusion, it is a thixotropic…

Single-component adhesive for the installation of Idrostop. Idrostop Mastic is…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide.

Pre-blended, high-performance, polymer-modified cementitious mortar with…

KERAFLEX

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic and stone tiles.

High-performance cementitious adhesive with no vertical slip and extended open…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid membrane. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. EMICODE: EC1 Plus - very low…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPEGROUT THIXOTROPIC ZERO

Shrinkage-compensated fibre-reinforced mortar for concrete repair

This product replaces MAPEGROUT TISSOTROPICO

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

NIVOPLAN

TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings. Workability time: 2-3 hours. Thickness applied: from 2 to 20 mm. Waiting time before laying ceramic and natural stone:…

TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings.…

Synthetic rubber latex admixture to improve mechanical strength of cementitious mixes for screeds and renders. Also for producing bonding slurries for Mapei Screeds and splatterdash coats for renders…

Synthetic rubber latex admixture to improve mechanical strength of cementitious…

PRIMER G

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water according to the absorption of the substrate. Drying time: 2 hours according to the dilution rate and the…

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to…

TOPCEM PRONTO

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds.

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal…

ULTRACARE FUGA FRESCA GROUT REFRESH

Polymeric paint to refresh the colour of the cementitious grouts.

This product replaces FUGA FRESCA

ULTRACOLOR PLUS

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…