Project Oficinas Centrais Peugeot, Funchal

Oficinas Centrais Peugeot

Funchal, Portugal

Ref #: 50025

Category: COMMERCIAL FACILITIES


Yard	Oficinas centrais Peugeot
Location	Funchal, Portugal
Subcategory	CAR DISTRIBUTOR
Built in	2009
Opened in	2010
Application	Impermeabilização, reperação e protecção de betão e assentamento de cerâmica
Application Type	Floor/wall coverings
Client	Leo Import
Contractor company	Concreto Plano
Installer companies	Concreto Plano
Architects	João Francisco Caires
MAPEI Distributor	Flagame

Product used for the project

EPOJET

Superfluid epoxy resin for injection. Epojet is used for monolithic repair of structures which have cracked due to overloading, impact, earthquakes etc; it is also used for bonding and structural…

Superfluid epoxy resin for injection. Epojet is used for monolithic repair of…

EPORIP

Two-component solvent-free epoxy adhesive, for repairing cracks in screeds. Suitable as a primer for tiling metal surfaces. Where to use: Monolithic construction joints between fresh and hardened…

Two-component solvent-free epoxy adhesive, for repairing cracks in screeds.…

ISOLASTIC

TECHNICAL DATA OF KERABOND/KERABOND T/KERABOND PLUS+ISOLASTIC: Pot life of mix: more than 8 hours. Open time: 20 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24-36…

TECHNICAL DATA OF KERABOND/KERABOND T/KERABOND PLUS+ISOLASTIC: Pot life of mix:…

KERAFLEX

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic and stone tiles.

High-performance cementitious adhesive with no vertical slip and extended open…

Synthetic rubber latex admixture to improve mechanical strength of cementitious mixes for screeds and renders. Also for producing bonding slurries for Mapei Screeds and splatterdash coats for renders…

Synthetic rubber latex admixture to improve mechanical strength of cementitious…

PLANITOP 100

TECHNICAL DATA: Maximum dimension of aggregate: 0.2 mm. Mixing ratio: 100 parts of PLANITOP 100 with 26-27 parts of water. Pot life of mix: 20-30 minutes (at +20°C). Minimum applicable thickness: 1…

TECHNICAL DATA: Maximum dimension of aggregate: 0.2 mm. Mixing ratio: 100 parts…

PLASTIMUL

Bituminous emulsion waterproofer and adhesive. Use Plastimul for waterproofing horizontal and vertical surfaces on foundations, retaining walls, concrete under-linings to roofs etc. Due to its…

Bituminous emulsion waterproofer and adhesive. Use Plastimul for waterproofing…

PRIMER SN

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix: viscous fluid. Density of mix (kg/m³): 1500. Viscosity of the mix (mPa·s): 1,100 ±…

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of…

ULTRACOLOR PLUS

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…