Project Reconstruction of an office building, Veszprém, Veszprém

Reconstruction of an office building, Veszprém

Veszprém, Hungary

Ref #: 392020

Category: PUBLIC BUILDINGS AND PLACES


Yard	Istallation of floors in the office and in the staircase.
Location	Veszprém, Hungary
Subcategory	OFFICES
Application	Installation of floors in an old building with the products of Mapei.
Start and finish date	2020
Application Type	Cementitious & resin flooring systems
Contractor company	VEMÉV-Szer Ltd.
Installer companies	Beton-Dekor Art Ltd.
MAPEI Distributor	Pillér Kft.
Credits	Erika Belléncs
MAPEI Coordination	András Doma

Product used for the project

ECO PRIM GRIP PLUS

Multi-purpose, ready-to-use, low odour, bonding promoter primer with a very low emission of volatile organic compounds (VOC) for render, smoothing and levelling compounds and cementitious adhesives,…

Multi-purpose, ready-to-use, low odour, bonding promoter primer with a very low…

MAPECEM PRONTO

Pre-blended, ready to use, fast-setting and drying hydraulic binder for shrinkage compensated screeds. For the formation of bonded, un-bonded, floating and heated screeds on existing and new slabs…

Pre-blended, ready to use, fast-setting and drying hydraulic binder for…

MAPEFLOOR FINISH 52 W

Two component, polyurethane finishing sealer to be used as a dust-repellent and anti-oil finishing coat on concrete and Ultratop, or as a finishing coat on epoxy systems. Mapefloor Finish 52 W is…

Two component, polyurethane finishing sealer to be used as a dust-repellent and…

MAPEFLOOR FINISH 58 W

TECHNICAL DATA: Mixing ratio: comp. A: comp. B = 10:1 transparent - 11:1 if coloured. Colour of mix: transparent or coloured. Consistency of mix: fluid. Density of mix (kg/m³): 1,065-1,095. Abrasion…

TECHNICAL DATA: Mixing ratio: comp. A: comp. B = 10:1 transparent - 11:1 if…

MAPELUX OPACA

A high-strength, matt metallic wax used for use with the Mapefloor system, to protect floors subject to particularly intense use. Mapelux Opaca is also used with Ultratop floors to facilitate easier…

A high-strength, matt metallic wax used for use with the Mapefloor system, to…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems.

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PRIMER LT

Acrylic adhesion promoter for ULTRATOP LOFT and cementitious skimming mortars. For internal use. TECHNICAL DATA: Consistency: fluid liquid. Colour: white. Application: roller or brush. Consumption:…

Acrylic adhesion promoter for ULTRATOP LOFT and cementitious skimming mortars.…

PRIMER SN

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix: viscous fluid. Density of mix (kg/m³): 1500. Viscosity of the mix (mPa·s): 1,100 ±…

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of…

TOPCEM PRONTO

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds.

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal…

ULTRATOP LOFT F

One-component trowellable coarse-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect.

One-component trowellable coarse-textured cementitious paste applied in layers…

ULTRATOP LOFT W

One-component trowellable fine-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect.

One-component trowellable fine-textured cementitious paste applied in layers up…