Project Robinson Blue Hotel, Ierapetra


Yard	Hotel interior and exterior floors
Location	Ierapetra, Greece
Subcategory	CLUB, HOTEL/INN
Opened in	2018
Application	Supply of products for waterproofing, floors and walls covering
Start and finish date	2018/2020
Application Type	Floor/wall covering, Waterproofing systems
Contractor company	Η-Κ ΑΕΒΕ
Installer companies	Thermal Insulation: Labrokonstantakis Pantelis, Waterproofing: Malliotakis George
Architects	Alpha Architecture Alexandrakis & Partners
Specialists involved	Alpha Architecture Alexandrakis & Partners
MAPEI Distributor	Baxevanis
Credits	Christos Drazos
MAPEI Coordination	Rerras Panagiotis

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide.

Pre-blended, high-performance, polymer-modified cementitious mortar with…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid membrane. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. EMICODE: EC1 Plus - very low…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPEFER 1K

One-component, anti-corrosion cementitious mortar for steel reinforcement rods. TECHNICAL DATA: Maximum dimension of aggregate: 0.5 mm. Mixing ratio: 100 parts of MAPEFER 1K with 20-22 parts of…

One-component, anti-corrosion cementitious mortar for steel reinforcement rods.…

Mapegrout Thixotropic

Controlled-shrinkage fibre-reinforced grout for the repair of concrete. Use Mapegrout Thixotropic for all concrete repairs such as: reconstruction of concrete cover, repairs of corners, beams,…

Controlled-shrinkage fibre-reinforced grout for the repair of concrete. Use…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPELASTIC SMART

Two-component, high-flexibility cementitious mortar (with crack-bridging> 2 mm), applied by trowel or with a roller, for waterproofing balconies, terraces, bathrooms and swimming pools. TECHNICAL…

Two-component, high-flexibility cementitious mortar (with crack-bridging> 2…

MAPETHERM AR1 GG

One-component, large-grained cementitious mortar for bonding and levelling insulation panels and for thermal insulation systems. Where to use: Bonding all types of thermal-insulating panels…

One-component, large-grained cementitious mortar for bonding and levelling…

Extruded sintered polystyrene insulating panels for thermal insulation systems. ETA 10/0025 TECHNICAL DATA: Composition: sintered expanded polystyrene. Colour: white. Thickness available cm: 4, 5, 6,…

Extruded sintered polystyrene insulating panels for thermal insulation systems.…

MAPETHERM NET

Alkali-resistant glass fibre mesh suitable for reinforced skimming layers when repairing façades, or for the execution of MAPETHERM thermal insulation systems. TECHNICAL DATA: Composition: 100% glass…

Alkali-resistant glass fibre mesh suitable for reinforced skimming layers when…

PLANISEAL 88 (Former Idrosilex Pronto)

Osmotic cementitious mortar suitable for contact with drinking water, for waterproofing masonry and concrete structures.

Osmotic cementitious mortar suitable for contact with drinking water, for…

QUARZOLITE BASE COAT

Coloured acrylic undercoat with a smooth finish and good filling and adhesion promoting properties, for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or…

Coloured acrylic undercoat with a smooth finish and good filling and adhesion…

QUARZOLITE TONACHINO

High-protection, thick-layered acrylic coating product with high filling properties for internal and external surfaces. Available in the following granulometries: 0.7 mm, 1.2 mm, 1.5 mm and 2.0 mm.…

High-protection, thick-layered acrylic coating product with high filling…