Project Rudas Thermal Bath, Budapest


Yard	Installation of ceramic tiles, 4 new pool, jacuzzi.
Location	Budapest, Hungary
Subcategory	BATH
Application	Mapei products were used in connection with the installation of ceramic tiles.
Start and finish date	2013/2014
Application Type	Floor/wall coverings
Contractor company	Kalotherm Zrt.
Credits	Dávid Kecskeméti

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials. The white version has very high white balance and excellent workability.

High-performance cementitious adhesive with no vertical slip and extended open…

ECO PRIM GRIP PLUS

Multi-purpose, ready-to-use, low odour, bonding promoter primer with a very low emission of volatile organic compounds (VOC) for render, smoothing and levelling compounds and cementitious adhesives,…

Multi-purpose, ready-to-use, low odour, bonding promoter primer with a very low…

ISOLASTIC

TECHNICAL DATA OF KERABOND/KERABOND T/KERABOND PLUS+ISOLASTIC: Pot life of mix: more than 8 hours. Open time: 20 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24-36…

TECHNICAL DATA OF KERABOND/KERABOND T/KERABOND PLUS+ISOLASTIC: Pot life of mix:…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide.

Pre-blended, high-performance, polymer-modified cementitious mortar with…

KERAFLEX

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic and stone tiles.

High-performance cementitious adhesive with no vertical slip and extended open…

KERALASTIC

High performance two-component polyurethane adhesive for the installation of ceramic, porcelain, natural and agglomerate stone tiles & mosaics on interior and exterior walls and floors. Improved…

High performance two-component polyurethane adhesive for the installation of…

KERAPOXY CQ

Two-component epoxy grout, easy to apply and excellent cleanability, with a bacteriostatic agent and BioBlock® technology, ideal for grouting ceramic tiles and mosaics. For joints of at least 1 mm.…

Two-component epoxy grout, easy to apply and excellent cleanability, with a…

LATEX PLUS

TECHNICAL DATA OF LATEX PLUS + KERAQUICK S1: Pot life of mix: 45 minutes. Open time: 20 minutes. Waiting time before grouting: 2-3 hours. Set to light foot traffic: approx. 2-3 hours. Ready for use:…

TECHNICAL DATA OF LATEX PLUS + KERAQUICK S1: Pot life of mix: 45 minutes. Open…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

MAPESIL LM

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone for movements up to 25%.

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone…

PROSFAS

Solvent free silicate based consolidating compound for cement screeds. Where to use: Consolidation of cement substrates with poor consistency even in depth, hardening cement screeds that tend to…

Solvent free silicate based consolidating compound for cement screeds. Where to…

ULTRACARE FUGA FRESCA GROUT REFRESH

Polymeric paint to refresh the colour of the cementitious grouts.

This product replaces FUGA FRESCA

ULTRACOLOR PLUS

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…

ULTRALITE S2

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 30 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24 hours. Set to light foot traffic: approx. 24 hours.…

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 30 minutes.…