Project S. Alfonso Church and Convent, Agrigento

S. Alfonso Church and Convent

Agrigento, Italy

Ref #: 4683

Category: PUBLIC BUILDINGS AND PLACES

Construction


Yard	Walls consolidation
Location	Agrigento, Italy
Subcategory	CHURCH
Built in	2008
Opened in	2009
Application	Vaults restoration and consolidation
Application Type	Masonry restoration
Contractor company	Cobar srl
Installer companies	S.E.I.
Architects	Ing. Linetti
Project Manager	Ing. Susanna Gara

Product used for the project

ANTIPLUVIOL S

Ultra high-performance, transparent, siloxane resin water-repellent impregnator. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 0.8. Active…

Ultra high-performance, transparent, siloxane resin water-repellent…

EPOJET LV

Two component low viscosity epoxy resin for injection. Epojet LV is used to attribute the monolithic nature to cracked structures and for bonding and structural strengthening of concrete and masonry…

Two component low viscosity epoxy resin for injection. Epojet LV is used to…

MAPEWOOD PASTE 140

Thixotropic epoxy adhesive for restoring wooden structural elements. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 2 : 1. Workability time: 1 hour. Setting time: 4-5 hours. Final hardening time:…

Thixotropic epoxy adhesive for restoring wooden structural elements. TECHNICAL…

MAPEWRAP 21

Superfluid epoxy resin for impregnation with Mapewrap “wet system”. Mapewrap 21 is a two-component superfluid solvent free product based on epoxy resins, especially formulated for the impregnation,…

Superfluid epoxy resin for impregnation with Mapewrap “wet system”. Mapewrap 21…

MAPEWRAP 31

Medium viscosity epoxy resin for impregnation with Mapewrap “dry system”. Mapewrap 31 is a two-component solvent free paste product based on epoxy resins, especially formulated for the impregnation,…

Medium viscosity epoxy resin for impregnation with Mapewrap “dry system”.…

MAPEWRAP C FIOCCO

High-strength carbon fibre cord to be impregnated with MAPEWRAP 21 (two-component, super-fluid epoxy resin) to make “structural connections”. TECHNICAL DATA: Type of fibre: high-strength carbon.…

High-strength carbon fibre cord to be impregnated with MAPEWRAP 21…

Epoxy primer specific for the Mapewrap system. Mapewrap Primer 1 is a two-component super-fluid solvent-free product based on epoxy resins, specific for the preparation of concrete surfaces that need…

Epoxy primer specific for the Mapewrap system. Mapewrap Primer 1 is a…

PLANITOP HDM MAXI

TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 4 parts of PLANITOP HDM MAXI comp. A with 1 part of PLANITOP HDM MAXI comp. B. Pot life of mix: approximately 1 hour (at +20°C).…

TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 4 parts of…

PRIMER G

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water according to the absorption of the substrate. Drying time: 2 hours according to the dilution rate and the…

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to…

SILANCOLOR PITTURA

Transpirant, water-repellent, siloxane paint resistant to aggressive environments for internal and external surfaces.

Transpirant, water-repellent, siloxane paint resistant to aggressive…

SILANCOLOR PRIMER

Transpirant siloxane undercoat with a smooth finish. TECHNICAL DATA: Consistency: fluid liquid. Colour: milky. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids content (EN ISO 3251) (%):…

Transpirant siloxane undercoat with a smooth finish. TECHNICAL DATA:…