Project S.Cesarea Thermal SpA, S.Cesarea Terme


Yard	global SpA restoration
Location	S.Cesarea Terme, Italy
Subcategory	HOTEL/INN
Built in	2011
Opened in	2012
Application	Ceramic installation, structural strenghtening and painting
Application Type	Waterproofing systems
Client	Terme di S. Cesarea SpA
Contractor company	f.lli Perrotta snc
Installer companies	f.lli Perrotta snc
Architects	ing. Tartini; ing. Codazzo; arch. Criniti
Credits	ing. Dispoto
Project Manager	ing. Rocco Tartini

CARBOPLATE

Pultrused carbon fibre plates pre-impregnated in epoxy based resin, protected by a double film of plastic. Carboplate is a range of pultrused carbon fibre plates, pre-impregnated in epoxy based…

Pultrused carbon fibre plates pre-impregnated in epoxy based resin, protected…

ELASTOCOLOR PITTURA ZERO

Indoor and outdoor crack-bridging, anti-carbonation elastomeric paint, resistant to moulds and algae, with offset CO 2 emissions through the entire life cycle

Indoor and outdoor crack-bridging, anti-carbonation elastomeric paint,…

This product replaces ELASTOCOLOR PITTURA

EPORIP

Two-component solvent-free epoxy adhesive, for repairing cracks in screeds. Suitable as a primer for tiling metal surfaces. Where to use: Monolithic construction joints between fresh and hardened…

Two-component solvent-free epoxy adhesive, for repairing cracks in screeds.…

KERAPOXY ADHESIVE

Two-component epoxy adhesive for ceramic, porcelain and natural agglomerate stone. For interior, exterior and underwater use. Ideal for bonding to fibreglass swimming pools. COVERAGE: approx. 1.5…

Two-component epoxy adhesive for ceramic, porcelain and natural agglomerate…

MAPELASTIC FOUNDATION

Two-component flexible cementitious mortar for waterproofing concrete and masonry surfaces subject to negative and positive hydraulic pressure. Where to use: Waterproofing concrete and masonry…

Two-component flexible cementitious mortar for waterproofing concrete and…

MAPEWRAP 11

Two-component, normal-setting, thixotropic epoxy grout for evening out concrete surfaces and for structural bonding.

Two-component, normal-setting, thixotropic epoxy grout for evening out concrete…

MAPEWRAP 31

Medium viscosity epoxy resin for impregnation with Mapewrap “dry system”. Mapewrap 31 is a two-component solvent free paste product based on epoxy resins, especially formulated for the impregnation,…

Medium viscosity epoxy resin for impregnation with Mapewrap “dry system”.…

Epoxy primer specific for the Mapewrap system. Mapewrap Primer 1 is a two-component super-fluid solvent-free product based on epoxy resins, specific for the preparation of concrete surfaces that need…

Epoxy primer specific for the Mapewrap system. Mapewrap Primer 1 is a…

PLANITOP 200

TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Packaging: 25 kg bags.

PLANITOP HDM MAXI

TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 4 parts of PLANITOP HDM MAXI comp. A with 1 part of PLANITOP HDM MAXI comp. B. Pot life of mix: approximately 1 hour (at +20°C).…

TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 4 parts of…

PRIMER 3296

TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1: 1 or 1:2 according to the absorption of the substrate. Drying time: 1-5 days. Waiting time before laying with vinyl…

TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1:…