Project Sem-Abrigo welcome centre, Ponta Delgada

Sem-Abrigo welcome centre

Ponta Delgada, Portugal

Ref #: 1

Category: RESIDENTIAL BUILDINGS

Construction


Yard	welcome centre
Location	Ponta Delgada, Portugal
Subcategory	APARTMENTS
Built in	2017
Opened in	2018
Application	supply of products for thermal insulation and resins for floors
Start and finish date	2017/2018
Application Type	Facade interventions, Cementitious & resin flooring systems
Client	Cáritas Diocesana dos Açores
Contractor company	Marques, S.A.
Installer companies	Spitex II
Architects	Arq.º Óscar Catarino (Box Arquitetos)
Specialists involved	Arq.º Óscar Catarino (Box Arquitetos)
MAPEI Distributor	Spitex II

Product used for the project

MAPECOLOR PASTE

System for colouring MAPEFLOOR I 300 SL, MAPEFLOOR I 500 W, MAPEFLOOR PU 410, PRIMER SN, MAPEFLOOR DECOR 700, MAPEFLOOR I 360 AS and MAPEFLOOR I 390 EDF. N.B.: other RAL colours available upon…

System for colouring MAPEFLOOR I 300 SL, MAPEFLOOR I 500 W, MAPEFLOOR PU 410,…

MAPEFLOOR FINISH 52 W

Two component, polyurethane finishing sealer to be used as a dust-repellent and anti-oil finishing coat on concrete and Ultratop, or as a finishing coat on epoxy systems. Mapefloor Finish 52 W is…

Two component, polyurethane finishing sealer to be used as a dust-repellent and…

MAPEFLOOR FINISH 58 W

TECHNICAL DATA: Mixing ratio: comp. A: comp. B = 10:1 transparent - 11:1 if coloured. Colour of mix: transparent or coloured. Consistency of mix: fluid. Density of mix (kg/m³): 1,065-1,095. Abrasion…

TECHNICAL DATA: Mixing ratio: comp. A: comp. B = 10:1 transparent - 11:1 if…

MAPELUX OPACA

A high-strength, matt metallic wax used for use with the Mapefloor system, to protect floors subject to particularly intense use. Mapelux Opaca is also used with Ultratop floors to facilitate easier…

A high-strength, matt metallic wax used for use with the Mapefloor system, to…

PRIMER GRIP WHITE

Multi-purpose, ready-to-use, synthetic resin-based bonding promoter in water dispersion with silica aggregates and very low emission of volatile organic compounds (VOC). For internal floors and…

Multi-purpose, ready-to-use, synthetic resin-based bonding promoter in water…

PRIMER LT

Acrylic adhesion promoter for ULTRATOP LOFT and cementitious skimming mortars. For internal use. TECHNICAL DATA: Consistency: fluid liquid. Colour: white. Application: roller or brush. Consumption:…

Acrylic adhesion promoter for ULTRATOP LOFT and cementitious skimming mortars.…

PRIMER SN

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix: viscous fluid. Density of mix (kg/m³): 1500. Viscosity of the mix (mPa·s): 1,100 ±…

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of…

QUARZOLITE BASE COAT

Coloured acrylic undercoat with a smooth finish and good filling and adhesion promoting properties, for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or…

Coloured acrylic undercoat with a smooth finish and good filling and adhesion…

ULTRATOP LOFT W

One-component trowellable fine-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect.

One-component trowellable fine-textured cementitious paste applied in layers up…