Products for waterproofing

Mapei has developed various product systems to carry out secure waterproofing work, such as the range of cementitious and acrylic waterproofing products for terraces, balconies, bathrooms, road joists, basins and storage tanks, bentonite sheets, cementitious products and bitumen emulsions.

Select a product category

Bituminous emulsions

Injection products

Joints and cold joints

Preparing concrete or brick structures

Pure polyurea and hybrid polyurea-based systems

Ready-to-use systems

Repair of waterproofing - Bentonite systems

Repair of waterproofing of underground structures

Roofing - Polymer Bitumen Membranes

Roofing with Bituminous Membranes

Sealing and waterproofing expansion joints and cold joints

Synthetic Waterproofing Membranes

Waterproofing hydraulic works

Waterproofing structures

Waterproofing structures above ground

Waterproofing underground structures

Waterproofing underground structures - Bentonite systems

AQUAFLEX ROOF HR

Fibre-filled liquid membrane in water emulsion with high solar reflectance and thermal emittance with a solar reflectance index (SRI) of 105.…

Fibre-filled liquid membrane in water emulsion with high solar reflectance and…

AQUAFLEX ROOF ID

DRAIN VERTICAL DRAIN LATERAL

Kit for installing floor drains, ideal for draining off water from terraces, balconies, bathrooms, boiler rooms, wash-rooms, etc. TECHNICAL DATA:…

Kit for installing floor drains, ideal for draining off water from terraces,…

ELASTOCOLOR WATERPROOF

Waterproof, easy-to-clean acrylic paint for internal and external surfaces in permanent contact with water. TECHNICAL DATA: Consistency: thick…

Waterproof, easy-to-clean acrylic paint for internal and external surfaces in…

MAPEBAND TPE

TPE tape for flexible sealing and waterproofing of expansion joints and cracks subject to movement.

TPE tape for flexible sealing and waterproofing of expansion joints and cracks…

MAPECOAT PU 20 N

Two-component coloured aliphatic polyurethane topcoat for membranes from the Purtop range

Two-component coloured aliphatic polyurethane topcoat for membranes from the…

MAPEGUM WPS

Quick-drying flexible liquid membrane for waterproofing internal surfaces. TECHNICAL DATA: Consistency: paste. Density of the mix: 1.45 g/cm³. pH: 9.…

Quick-drying flexible liquid membrane for waterproofing internal surfaces.…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools. TECHNICAL DATA: Consistency of mix:…

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPELASTIC AQUADEFENSE

Ready-to-use, ultra quick-drying, flexible liquid membrane for waterproofing internal and external surfaces. TECHNICAL DATA: Consistency: paste.…

Ready-to-use, ultra quick-drying, flexible liquid membrane for waterproofing…

MAPELASTIC TURBO

Two-component rapid-drying elastic cementitious mortar for waterproofing terraces and balconies, including at low temperatures and on substrates not…

Two-component rapid-drying elastic cementitious mortar for waterproofing…

MAPETAPE

Cold-applied self-adhesive tape for sealing and waterproofing overlapping joints and cracks. Available in various widths (50, 100, 150 and 200 mm)…

Cold-applied self-adhesive tape for sealing and waterproofing overlapping…

PLANISEAL 288

Two-component cementitious mortar for waterproofing structures below ground level and storage tanks. TECHNICAL DATA: Consistency: fluid; applicable…

Two-component cementitious mortar for waterproofing structures below ground…

PLASTIMUL MY

All-purpose, bituminous emulsion coating TECHNICAL CHARACTERISTICS Plastimul MY is a water-emulsified, thixotropic, bituminous coating which dries to…

All-purpose, bituminous emulsion coating TECHNICAL CHARACTERISTICS Plastimul MY…

PRIMER P1

One-component solvent-based primer for polyurea coatings (from the PURTOP line) on plastic surfaces such as PVC. TECHNICAL DATA: Consistency:…

One-component solvent-based primer for polyurea coatings (from the PURTOP line)…

PRIMER P2

One-component solvent-based primer for polyurea coatings (from the PURTOP line) on plastic surfaces such as TPO. TECHNICAL DATA: Consistency:…

One-component solvent-based primer for polyurea coatings (from the PURTOP line)…

PRIMER SN

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20.…

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…

PURTOP 1000

Two-component, solvent-free, pure polyurea membrane applied by spray with a high-pressure, bi-mixer type pump, to form waterproof coatings directly…

Two-component, solvent-free, pure polyurea membrane applied by spray with a…

TRIBLOCK TMB

Three-component, self-levelling, epoxy-cementitious coating for layers from 1.5 to 3 mm thick. TECHNICAL DATA: Mixing ratio: comp. A : comp. B :…

Three-component, self-levelling, epoxy-cementitious coating for layers from 1.5…

Solutions for areas in contact with water

Waterproofing is a theme which we always approach with success by offering a wide range of specific, safe and long-lasting solutions. The main problem encountered by users is infiltrations in areas such as second pours, underground structures, terraces and roofs.