MAPEFILL

High-flow shrink-free grout for anchors.
Mapefill is used to anchor machinery, bolts, precast metallic structures, turbines, machine tools, etc into concrete. It is also recommended for filling rigid joints between concrete elements and for underpinning.
Mapefill has high mechanical strength at early ages (24 hours) and high adhesion to steel and concrete.
Mapefill is formulated from cement binders, graded aggregate and special additives. The mixture is prepared by mixing a 25 kg bag of Mapefill with 3.5-3.75 l of clean water, depending on the desired consistency. The mortar obtained is poured into the foundations, which must have been thoroughly soaked with water beforehand, taking care to allow air to escape to prevent air-bubbles.
For filling large volumes, the addition of Gravel 6-10 is recommended.
Mapefill meets the minimum requirements of EN 1504-6.

Consumption
1.95 kg/dm3 of cavity to be filled.

Packaging
25 kg bags.

Related documentation

Technical data sheet
Download

Last Projects MAPEFILL

Category icon SPORT FACILITIES

2017/2019

Puskas Arena

Budapest, Hungary

New building

Category icon INFRASTRUCTURES

2019/2020

Lamasinata Bridge

Bari, Italy

Concrete restoration, Structural reinforcement

Category icon SPORT FACILITIES

2019

OMEGA centrum sportu a zdraví

Olomouc, Czech Republic

Waterproofing, Installation of floors, Floor/wall covering, Installation of floor and wall coverings, Solutions for sports flooring, Concrete restoration

Category icon COMMERCIAL FACILITIES

2017/2018

BOWIT MOTOR VEHICLE CENTRE

Kozmin Wielkopolski, Poland

Installation of floor and wall coverings, Resin floors application

Keep in touch

Subscribe to our newsletter to get Mapei news