Back

ULTRACOLOR PLUS

ULTRACOLOR PLUS

Grout that withstands time. New colours for every room.

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect^® and mould-resistant BioBlock^® technology for grouting joints up to 20 mm wide.

ADVANTAGES:

Mould-resistant (BioBlock® Technology)
Grouted areas are quickly ready for use
Water-repellent and easy to clean (DropEffect® technology)
Anti-efflorescence for uniform colour
Wide range of colours

TECHNICAL DATA:
Pot life of mix: 20-25 minutes.
Waiting time before finishing: 15-30 minutes.
Set to light foot traffic: approx. 3 hours.
Ready for use: 24 hours (48 hours for basins and swimming pools).
Colours: 40.
Application: rubber trowel.
Finishing: MAPEI sponge or Scotch-Brite^® pad.
EMICODE: EC1 Plus - very low emission.
Storage:
– 12 months (23 kg bags);
– 24 months (2 and 5 kg bags).
Consumption: according to the size of the joints.
Packaging: 23 kg bags and 4x5 kg Alupack and 8x2 kg Alupack boxes, according to the colour.

*CO₂ emissions measured throughout the life cycle of ULTRACOLOR PLUS from Zero Line in 2025 using Life Cycle Assessment (LCA) methodology, verified and certified with EPDs, have been offset through the acquisition of certified carbon credits in support of renewable energy and forestry protection projects. A commitment to the planet, to people and to biodiversity.

For more details on how emissions are calculated and on climate mitigation projects financed through certified carbon credits, please contact us.

Calculate consumption

Tile specifications

Grout specifications

Area to be covered

Your project:

Tile Length

Tile Width

Tile Thickness

Grout Joint Width

Area to be grouted

Consumption:

Grouts require:

Product packaging available*:

*Packages available depending on colours

The calculation is based on the actual volume to be filled and the product density.

The provided data should be considered indicative and for estimation purposes only, as certain factors that may still affect the actual consumption cannot be considered (for example, tile roughness, excess residual product, surface irregularities, etc.).