Project ISP Nebušice, Nebušice


Yard	ISP Nebušice
Location	Nebušice, Czech Republic
Subcategory	SCHOOL
Opened in	2010
Application	ISP Nebušice
Application Type	Floor/wall coverings

ADESILEX G19

Two-component epoxy-polyurethane adhesive. Where to use: Bonding of: - tile or sheet rubber flooring (with flat-back or canvas imprint or stalk back) for interiors and exteriors, subject to heavy and…

Two-component epoxy-polyurethane adhesive. Where to use: Bonding of: - tile or…

EPORIP

Technical data: Pot life: 60 minutes. Open time: 5 hours. Setting time: 24 hours. Final cure time: 15 days. Application: by brush, trowel, pouring. Storage: 24 months.

Technical data: Pot life: 60 minutes. Open time: 5 hours. Setting time: 24…

$LATEX PLUS$

LATEX PLUS

Latex admixture inducing elasticity to be mixed with Keraquick. Applications: Latex Plus is an admixture to be mixed with Keraquick. It improves deformability to meet the requirements of class S2…

Latex admixture inducing elasticity to be mixed with Keraquick. Applications:…

MAPECEM PRONTO

TECHNICAL DATA: Mixing ratio: 1 25 kg bags of MAPECEM PRONTO with approximately 2.2 litres of water. Workability time: 20-30 minutes. Set to light foot traffic: after 2-3 hours. Waiting time before…

TECHNICAL DATA: Mixing ratio: 1 25 kg bags of MAPECEM PRONTO with approximately…

MAPEGRID G 220

TECHNICAL DATA: Type of fibre: A.R. type glass fibre. Weight: 225 g/m ² . Mesh size: 25 x 25 mm. Tensile strength (kN/m): 45. Elongation at failure: < 3%. Packaging: 45.70 m x 90 cm rolls.

TECHNICAL DATA: Type of fibre: A.R. type glass fibre. Weight: 225 g/m ² . Mesh…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

NIVORAPID

Ultra-fast drying thixotropic cementitious levelling mortar, also suitable for vertical applications. Applications: Interior levelling of all types of substrates normally found in the building…

Ultra-fast drying thixotropic cementitious levelling mortar, also suitable for…

PRIMER SN

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix: viscous fluid. Density of mix (kg/m³): 1500. Viscosity of the mix (mPa·s): 1,100 ±…

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of…

ULTRABOND ECO FIX

TECHNICAL DATA: Consistency: creamy paste. Colour: light beige. Waiting time: 30 minutes - 12 hours. Set to light foot traffic: immediately after laying. Ready for use: immediately after laying.…

TECHNICAL DATA: Consistency: creamy paste. Colour: light beige. Waiting time:…

ULTRABOND ECO V4 SP

Universal adhesive in water dispersion with extended open time and very low emission of volatile organic compounds (VOC) for resilient flooring. Where to use: Internal bonding of: - homogeneous and…

Universal adhesive in water dispersion with extended open time and very low…

ULTRAPLAN ECO

Ultra-fast hardening self-levelling smoothing compound with very low VOC content. Applications: Interior levelling of new and existing substrates, as long as not subject to moisture, to make them…

Ultra-fast hardening self-levelling smoothing compound with very low VOC…