Project Ferenc Puskás Stadium, Budapest


Yard	New building
Location	Budapest, Hungary
Subcategory	STADIUM
Application	Supply of products for industrial floor, waterproofing, concrete repair, ceramic installation
Start and finish date	2017/2019
Application Type	New building
Client	National Centres for Sports (NSK)
Contractor company	Magyar Építő Zrt., ZÁÉV Zrt., Épkar Zrt., WHB Ltd.
Installer companies	Spectech Ltd., Akvaszig Ltd., Tipox Betontechnika Ltd., Stukkó Ltd., Ratskó Bau Ltd., Dominó Ltd.
Architects	György Skardeli
MAPEI Distributor	BNF Áruház, Csorna
Credits	OD Pictures
MAPEI Coordination	Gergely Garay, István Jankovits, Ervin Horváth, Zsolt Marton, Zsolt Dunai

MAPEBAND

Technical data: Length: 50 m. Width: 120 mm. ULTIMATE ELONGATION: > 400%. Packaging 50 m x 12 cm rolls; sealing gasket for outlets 118 x 118 mm and 300 x 300 mm; inside corner 90° outside corner 270°.

Technical data: Length: 50 m. Width: 120 mm. ULTIMATE ELONGATION: > 400%.…

MAPEFER 1K

Maximum dimension of aggregate: 0.5 mm. Mixing ratio: 100 parts of MAPEFER 1K with 20-22 parts of water. Pot life of mix: approximately 1 hour (at +20°C). Minimum applicable thickness: 2 mm. Waiting…

Maximum dimension of aggregate: 0.5 mm. Mixing ratio: 100 parts of MAPEFER 1K…

MAPEFLOOR PU 410

TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 16 : 3.9. Colour of mix: neutral. Consistency of mix: fluid. Pot life at +20°C: 30 minutes. Dusty dry: 2-4 hours. Set to light foot traffic: 24…

TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 16 : 3.9. Colour of mix:…

MAPEGROUT 430

DESCRIPTION: Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 100 parts of MAPEGROUT 430…

DESCRIPTION: Fine-grained, fibre-reinforced, normal-setting thixotropic mortar…

MAPELASTIC AQUADEFENSE

TECHNICAL DATA: Consistency: paste. Application temperature range: from +5°C to +35°C at +23°C and 50% R.H.. Waiting time between first and second coat: approximately 1 hour (at +23°C and 50% R.H.).…

TECHNICAL DATA: Consistency: paste. Application temperature range: from +5°C to…

MAPELASTIC FOUNDATION

TECHNICAL DATA: Consistency: thixotropic. Mixing ratio: comp. A: comp. B = 2.2 : 1. Pot life of mix: approximately 1 hour (at +20°C). Application temperature range: from +5°C to +40°C. Minimum…

TECHNICAL DATA: Consistency: thixotropic. Mixing ratio: comp. A: comp. B = 2.2…

MAPENET 150

TECHNICAL DATA: Colour: blue. Weight: 150 g/m² ± 5%. Mesh size: 4x4.5 mm. Storage: unlimited. Packaging: 50 m x 1 m rolls.

TECHNICAL DATA: Colour: blue. Weight: 150 g/m² ± 5%. Mesh size: 4x4.5 mm.…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PRIMER 3296

TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1: 1 or 1:2 according to the absorption of the substrate. Drying time: 1-5 days. Waiting time before laying with vinyl…

TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1:…

PRIMER SN

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix: viscous fluid. Density of mix (kg/m³): 1500. Viscosity of the mix (mPa·s): 1,100 ±…

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of…

PURTOP 400 M

Two-component, solvent-free, spray applied, hybrid polyurea membrane applied in sito using a high-pressure, bi-mixer type pump to form waterproof coatings on bridge decks and flat roofs. TECHNICAL…

Two-component, solvent-free, spray applied, hybrid polyurea membrane applied in…

ULTRAPLAN RENOVATION

DESCRIPTION: Fibre-reinforced levelling compound for interiors for thicknesses from 3 to 40 mm in a single application. APPLICATIONS: Where to use: internal floors for new or existing concrete,…

DESCRIPTION: Fibre-reinforced levelling compound for interiors for thicknesses…