Project Renovation of the M3 metro line, Budapest

Renovation of the M3 metro line

Budapest, Hungary

Ref #: 792023

Category: INFRASTRUCTURES


Yard	subsequent repair of waterproofing, cold cladding
Location	Budapest, Hungary
Subcategory	METRO
Application	subsequent repair of waterproofing, cold cladding
Start and finish date	2019/2023
Application Type	Tile & stone installation systems, Waterproofing systems
Contractor company	BKV Zrt.
Installer companies	Swietelsky Vasúttechnika Kft., Wayet Service Kft.
MAPEI Distributor	Bau Systeme 92 Kft.
MAPEI Coordination	Horváth Ádám, Garay Gergely

Product used for the project

ADESILEX PG1

Two-component, rapid-setting thixotropic adhesive for structural bonds. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 35 minutes (at +23°C). Minimum applicable thickness:…

Two-component, rapid-setting thixotropic adhesive for structural bonds.…

FOAMJET 260 LV

Two-component polyurethane flexible and low viscosity resin for injection and waterproofing.

Two-component polyurethane flexible and low viscosity resin for injection and…

LAMPOSILEX

Ultra-fast setting and drying hydraulic binder for plugging water leaks. Use Lamposilex to plug any source of water, even under pressure, in basements, tunnels, subways etc. and for sealing…

Ultra-fast setting and drying hydraulic binder for plugging water leaks. Use…

MAPEBAND EASY

TECHNICAL DATA: Type of material: rubber sandwiched between two layers of non-woven polypropylene fabric. Thickness: 0.68 mm. Width: 130 mm. Tensile strength: 45 N/15 mm. Elongation at failure: 315…

TECHNICAL DATA: Type of material: rubber sandwiched between two layers of…

MAPEGUM WPS - Liquid Waterproofing Membrane

DESCRIPTION: Quick-drying flexible liquid membrane for waterproofing internal surfaces. TECHNICAL DATA: Consistency: paste. Density of the mix: 1.45 g/cm³. pH: 9. Dry solids content: 73%. Storage:…

DESCRIPTION: Quick-drying flexible liquid membrane for waterproofing internal…

MAPELASTIC AQUADEFENSE

TECHNICAL DATA: Consistency: paste. Application temperature range: from +5°C to +35°C at +23°C and 50% R.H.. Waiting time between first and second coat: approximately 1 hour (at +23°C and 50% R.H.).…

TECHNICAL DATA: Consistency: paste. Application temperature range: from +5°C to…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

ULTRAPLAN RENOVATION

DESCRIPTION: Fibre-reinforced levelling compound for interiors for thicknesses from 3 to 40 mm in a single application. APPLICATIONS: Where to use: internal floors for new or existing concrete,…

DESCRIPTION: Fibre-reinforced levelling compound for interiors for thicknesses…