Project Shopping mall at Hoi Pa Street,

Shopping mall at Hoi Pa Street

Hong Kong

Ref #: 852156

Category: COMMERCIAL FACILITIES

Construction


Yard	G/F to 3/F. No. 122-132A Hoi Pa Street, Tsuen Wan N.T.
Location	Hong Kong
Subcategory	SHOPPING CENTER
Application	Flooring and grouting and waterproofing. Mapefloor I 600 W is also applied for this project.
Start and finish date	2014
Application Type	Floor/wall coverings
Contractor company	Martin Construction Co. Ltd.
Installer companies	Elite Distribution Co. Ltd. ; Rayhill Engineering Ltd.
Architects	Associated Architect Ltd.
MAPEI Distributor	Mapei China Ltd.

Product used for the project

KERAFLEX MAXI S1

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: > 30 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24 hours. Set to foot traffic: approx. 24 hours. Ready…

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: > 30 minutes.…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material.

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

Technical data: Length: 50 m. Width: 120 mm. ULTIMATE ELONGATION: > 400%. Packaging 50 m x 12 cm rolls; sealing gasket for outlets 118 x 118 mm and 300 x 300 mm; inside corner 90° outside corner 270°.

Technical data: Length: 50 m. Width: 120 mm. ULTIMATE ELONGATION: > 400%.…

MAPECOLOR PASTE

TECHNICAL DATA: Appearance: paste. Colour: 19 different RAL colours. Dry substances content (%): 99 ± 1. Application temperature range: from +10°C to +30°C. Storage: 24 months in its original sealed…

TECHNICAL DATA: Appearance: paste. Colour: 19 different RAL colours. Dry…

MAPEFILL GP

DESCRIPTION: Mapefill GP is a preblended powdered grout based on high strength cement, graded aggregates with 1 mm diameter and special additives with an expansive agent formulated by the MAPEI…

DESCRIPTION: Mapefill GP is a preblended powdered grout based on high strength…

MAPELASTIC FOUNDATION

TECHNICAL DATA: Consistency: thixotropic. Mixing ratio: comp. A: comp. B = 2.2 : 1. Pot life of mix: approximately 1 hour (at +20°C). Application temperature range: from +5°C to +40°C. Minimum…

TECHNICAL DATA: Consistency: thixotropic. Mixing ratio: comp. A: comp. B = 2.2…

PRIMER SN

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix: viscous fluid. Density of mix (kg/m³): 1500. Viscosity of the mix (mPa·s): 1,100 ±…

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of…

ULTRATOP

Description Ultra-quick setting self-levelling mortar based on special hydraulic binders, for abrasion-resistant floor coverings at a thickness from 5 to 40 mm. Application Ultratop may remain on…

Description Ultra-quick setting self-levelling mortar based on special…