Two-component, shiny epoxy finish in water dispersion for anti-dust and anti-grease treatments on concrete floors, cementitious substrates and as a finishing coat on epoxy systems. TECHNICAL DATA:…
Two-component, shiny epoxy finish in water dispersion for anti-dust and…
Anti-evaporation agent in water emulsion for protecting the surface of concrete against quickly drying out when exposed to sunlight and winds. TECHNICAL DATA: Application: spray Consumption: - neat:…
Anti-evaporation agent in water emulsion for protecting the surface of concrete…
Ready-to-use, high-performance adhesive paste with no vertical slip and long open time, for laying ceramic tiles on walls and floors (thickness of adhesive up to 5 mm). TECHNICAL DATA: Open time: ≥…
Ready-to-use, high-performance adhesive paste with no vertical slip and long…
Chloride-free anti-freeze admixture to ensure regular setting times of cementitious mortar and concrete. Also suitable for pre-compressed concrete. TECHNICAL DATA: Dosage: 1-2 kg every 100 kg of…
Chloride-free anti-freeze admixture to ensure regular setting times of…
Silica fume-based admixture with pozzolanic action Where to use Mapeplast SF can be used for the following applications: • High quality thixotropic mortar, resistant even under the most severe…
Silica fume-based admixture with pozzolanic action Where to use Mapeplast SF…
Easy-to-apply, two-component, anti-acid epoxy mortar with good cleanability properties for grouting joints at least 3 mm wide. TECHNICAL DATA: Pot life of mix: 45 minutes. Set to light foot traffic:…
Easy-to-apply, two-component, anti-acid epoxy mortar with good cleanability…
Three-component epoxy mortar with high chemical resistance for grouting ceramic tiles (minimum width of joint 5 mm). Technical data: Pot life of mix: 20 minutes. Set to light foot traffic: approx. 6…
Three-component epoxy mortar with high chemical resistance for grouting ceramic…
Two-component, protective acrylic filming agent in water dispersion for concrete, ULTRATOP and ULTRATOP LIVING floors. TECHNICAL DATA: Mixing ratio: comp. A: comp. B: = 10 : 0.15. Colour of mix:…
Two-component, protective acrylic filming agent in water dispersion for…
System for colouring MAPEFLOOR I 300 SL, MAPEFLOOR I 500 W, MAPEFLOOR PU 410, PRIMER SN, MAPEFLOOR DECOR 700, MAPEFLOOR I 360 AS and MAPEFLOOR I 390 EDF. N.B.: other RAL colours available upon…
System for colouring MAPEFLOOR I 300 SL, MAPEFLOOR I 500 W, MAPEFLOOR PU 410,…
Two-component, normal-setting, thixotropic epoxy grout for evening out concrete surfaces and for structural bonding. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Workability time: 35…
Two-component, normal-setting, thixotropic epoxy grout for evening out concrete…
Anti-abrasive agent for mechanized tunnelling Where to use Mapedrill F.R.A. 01 is used specifically in tunnels and excavations through rock where highly abrasive rock will rapidly wear down drilling…
Anti-abrasive agent for mechanized tunnelling Where to use Mapedrill F.R.A. 01…
High viscosity ultra rapid setting two-component polyurethane resin, to be injected for consolidating and waterproofing of structures subject to strong water ingress Where to use • Waterproofing rock…
High viscosity ultra rapid setting two-component polyurethane resin, to be…
Expansive, super-fluid cementitious binder for mixing injection slurry, mortar and concrete. TECHNICAL DATA: Mixing ratio: – injection slurry: 100 parts of STABILCEM with 32 parts of water; – mortar,…
Expansive, super-fluid cementitious binder for mixing injection slurry, mortar…
Osmotic, fibre-reinforced, fine-grained white smoothing compound used for conservative restoration and finishing work on concrete, stone and masonry structures. Idrosilex Pronto RPF is used for thick…
Osmotic, fibre-reinforced, fine-grained white smoothing compound used for…
Two-component, polyurethane finishing product in water dispersion with low yellowing properties, for anti-dust and anti-oil treatments. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 87 : 13.…
Two-component, polyurethane finishing product in water dispersion with low…
One-component, normal-setting cementitious mortar for smoothing concrete and cementitious render. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 100 parts of MONOFINISH with…
One-component, normal-setting cementitious mortar for smoothing concrete and…
Pultruded glass fibre rebar pre-impregnated with epoxy-modified vinylester resin for structural reinforcement of damaged reinforced concrete, brick, stone and tuff elements. TECHNICAL DATA: Tensile…
Pultruded glass fibre rebar pre-impregnated with epoxy-modified vinylester…
High tensile pultruded carbon fibre rebars impregnated with epoxy resin for structural strengthening of damaged concrete, wooden and masonry elements. TECHNICAL DATA: Modulus of elasticity: 155,000…
High tensile pultruded carbon fibre rebars impregnated with epoxy resin for…
