Two-component cement-free binder for low and very low permeable ground consolidation Where to use Mapejet System LP is a specially formulated compound, injected in a mix, to consolidate ground that…
Two-component cement-free binder for low and very low permeable ground…
Osmotic, fibre-reinforced, medium-grained white smoothing compound used for conservative restoration and finishing work on concrete, stone and masonry structures. Idrosilex Pronto RPG is used for…
Osmotic, fibre-reinforced, medium-grained white smoothing compound used for…
Medium-strength (40 MPa), compensated-shrinkage fibre-reinforced thixotropic mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of…
Two-component, anti-corrosion cementitious mortar for steel reinforcement rods. TECHNICAL DATA: Maximum dimension of aggregate: 0.5 mm. Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix:…
Two-component, anti-corrosion cementitious mortar for steel reinforcement rods.…
Anti-evaporation agent in water emulsion for protecting the surface of concrete against quickly drying out when exposed to sunlight and winds. TECHNICAL DATA: Application: spray. Consumption: – neat:…
Anti-evaporation agent in water emulsion for protecting the surface of concrete…
Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL DATA OF FUGOLASTIC + KERACOLOR: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to…
Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL…
Two-component epoxy primer for metal surfaces. TECHNICAL DATA: Mixing ratio: comp. A: comp B. = 100 : 30. Colour of mix: white. Consistency of mix: liquid. Dry substances content (%): 70. Density of…
Two-component epoxy primer for metal surfaces. TECHNICAL DATA: Mixing ratio:…
Slow-evaporating mixture to increase the open time of varnish for parquet. TECHNICAL DATA: Consumption: from 5% to 10% of the consumption of the varnish according to the dilution rate. Packaging: 1…
Slow-evaporating mixture to increase the open time of varnish for parquet.…
Ready-to-use, high-performance adhesive paste with no vertical slip and long open and adjustment time for ceramic tiles. Ideal for absorbent substrates. TECHNICAL DATA: Open time: ≥ 30 minutes.…
Ready-to-use, high-performance adhesive paste with no vertical slip and long…
Moisture curing polyurethane resin for consolidating and waterproofing damp screeds. TECHNICAL DATA: Consistency: liquid. Colour: brown. Dilution ratio: from 25 to 100% with THINNER PU. Set to light…
Moisture curing polyurethane resin for consolidating and waterproofing damp…
Thixotropic detergent for cleaning surfaces damaged by graffiti. TECHNICAL DATA: Consistency: liquid gel. Colour: straw yellow. Density (EN ISO 2811-1) (g/cm³): approx. 0.85. Application: brush.…
Thixotropic detergent for cleaning surfaces damaged by graffiti. TECHNICAL…
Grout made from special hydraulic binders for sealing micro-porosity which forms after the first polishing phase of ULTRATOP. TECHNICAL DATA: Consistency: fine powder. Colour: white, beige, light…
Grout made from special hydraulic binders for sealing micro-porosity which…
Two-component, water-based toning undercoat with high insulating properties with low emission of volatile organic compounds (VOC), no NMP for preparing solid and pre-sanded wooden floors and wooden…
Two-component, water-based toning undercoat with high insulating properties…
One-component, moisture curing, expansive polyurethane adhesive used by injection, for fastening and repairing parquet elements which are not perfectly bonded to the substrate. TECHNICAL DATA:…
One-component, moisture curing, expansive polyurethane adhesive used by…
One-component primer for silicone sealants. TECHNICAL DATA: Application of sealant: after 60 minutes. Colour: transparent straw yellow. Application: brush. Consumption: 5÷10 g/m (1 cm - deep joint).…
One-component primer for silicone sealants. TECHNICAL DATA: Application of…
