MAPEFLOOR FINISH 52 W

Two-component, polyurethane finishing product in water dispersion with low yellowing properties, for anti-dust and anti-oil treatments.
TECHNICAL DATA:
Mixing ratio: comp. A : comp. B = 87 : 13.
Colour of mix: opaline.
Consistency of mix: fluid.
Workability time: 30 minutes.
Dust dry (at +23°C and 50% R.H.): 20-35 minutes.
Set to light foot traffic (at +23°C and 50% R.H.): 12 hours.
Final hardening time: 7 days.
Taber Test (after 7 days, CS17 disk, 1000 cycles, 1000 g): 50 mg.
Bucholz hardness (after 7 days): 71.
Storage: 12 months in its original sealed packaging.
Application: short-haired roller such as mohair, by spray or airless spray system.
Consumption: 0.1-0.2 kg/m² per coat according to the absorption of the substrate.
Packaging: 5.4 kg kits (A + B).

İlgili belgeler

Teknik veri sayfası
İndir

Son Projeler MAPEFLOOR FINISH 52 W

Category icon TİCARİ TESİSLER

2020

Internal Self Levelling of King Yip Factory Building

Kwun Tong, Hong Kong

Installatıon of floors

Category icon TİCARİ TESİSLER

2020

Internal Self Levelling of On Tin Centre

San Po Kong, Hong Kong

Installatıon of floors

Category icon TİCARİ TESİSLER

2019

Lai Kok Shopping Centre

Cheung Sha Wan, Hong Kong

Installatıon of floors, Cemetitious and resin floor coverings

Category icon KONUT İNŞAATLARI

2017/2018

Sem-Abrigo welcome centre

Ponta Delgada, Portugal

Cemetitious and resin floor coverings, Facades maıntenance

İrtibatta olalım

Mapei'den haber almak için bültenimize abone olun